Apevia Genesis-WH Mid Tower Gaming Case with 2 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 4 x RGB Fans, White Frame

(1898 Reviews)

Price
$48.59

Style
Quantity
(50000 available )

Total Price
Share
92 Ratings
42
23
11
7
9
Reviews
  • Ap2_Chick

    > 3 day

    I made my bf build this with me. Wiring was a b****. I expected that though. The lower area where wires come into the case was sectioned off into 3, that made it really hard to organize the wires, so we just took some needle nose pliers to it and cut it out. The manual is kinda poopy, but I went online and found a better manual on their website.

  • Vivian

    Greater than one week

    So cute! very nice shade of pink, a little more pastel in real life than in the picture. the cables were kind of crazy when i opened it. the side panel bends too easily though. you also gotta be real good at cable management to fit all your cables, it was kind of a nightmare trying to lay my cables as flat as possible because the space between the panel and the cables was way too little. Other than that, its cute and works great!

  • cesar dangelo

    Greater than one week

    First off, this case is awesome! the installation was a little eh, and the fans already attached to the case come with the cables all tangled up, but with proper amount of time this is not hard to manage. OH! and also, for new pc builders, this applies to any system, after swap or installation of components you might notice the mother board has power and so do all other component, but you dont get usb or display. i fixed this by making sure i was grounded and shutting off the power fully from the system, and removing the BIOS for about 30 seconds, press down the power button for a good minute, and then turn on the system.

  • JennRose

    06-06-2025

    Beautiful case. Love it. I got the Genesis 4 rgb fan, Pink Version at 83.00. Its a beautiful case. Made Very well. Good air flow. Plenty of room. Plenty of spots to attach drives and other peripherals. Nice options. Gorgeous RGB. Beautiful glass panels. Shipped in nice and safe packaging. Instructions included were adequate, as good as youre gonna get, but they were more than enough so long as you scan thru them 1st then refer if needed. Was EASY to install everything. Wire Management was also a Breeze. RGB is stunning. Case fans are quite nice and i appreciate the shock cushions at the screw holes. Im a experienced pc builder, but I would say this case is fairly Beginner friendly, just take a few minutes and gameplan your wire management and dont lock anything in until you are almost done, sometimes when you get into it, a better way may present itself. Just take your time and I feel anyone can build in this case. Magnetic covers are both nice and well made. Plenty of USB ports Really looks nice Pros: Gorgeous RGB Fair Price Gorgous window panels Easy to wire manage and install parts Plenty of Hardware included Good enough Instal Manual Plenty of USB ports in front/top Has plenty of spots to mount storage drives, either show them off or hide them Plenty of room Case is Sturdy and well made. Good materials and metal. Does not look or feel cheap. Air flow is above average, not perfect, but really good. Case is quiet Was easy to put back panel back on after i installed everything, no issues at all. Case came wired neatly and the power/rgb wires were clearly marked and easy to plug into Motherboard Plenty of options and routes for Wire management. Cons- Really hard to find any. The case fans being proprietary is the one gripe I have, not end of world, especially if you can replace them down the road at a fair price Not a con, but just word of caution, When removing glass panels, make sure to keep hand at base, its very easy for the panel to slide/push off base when removing them and thus it could drop and one risks damaging them, Be careful- Obviously So long as this case remains at or close to 85.00, I HIGHLY Recommend this. Im very happy with mine.

  • C. C. Harrell

    > 3 day

    I am in the process of creating my perfect computer setup and this case caught my attention. I am a fan of all things cute and girly and this is a perfect union of asthetics and function. The case is made of well constructed materials. It is spacious enough for me to work with and does not have sharp edges of cuts. One down side the back plate it has punchouts instead of screws so depending on what you prefer this could be a dealbreaker. All in all it would make a good case for a cute egirl setup or a excellent gift for anyone that wants a cute gaming setup.

  • Allison Whitman

    > 3 day

    LOVE LOVE LOVE

  • John E. Duerr

    > 3 day

    This case is awesome. The fans worked perfectly and all of my components fit without any issue. Couldnt be happier.

  • Carlos Espindola

    Greater than one week

    I bought this case for my girlfriend and she really wanted a pink case and for this price I thought why not try it. For the price the case is very nice, the RGB fans are pretty good and the case itself is very nice. The main issue I had the with the case was mounting the GPU. For the life of me I do not know why you need to rip off the back pieces instead of the pieces being screwed on. This case would get 5 stars if it wasn’t for this odd feature. Other than that this is a great case that looks very nice for the price!

  • Caleb

    > 3 day

    EDIT: After a year still a good value case, but not great. Rear fan started to make a noise that was obnoxiously loud and would not go away despite anything I tried. Case is also a bit small, barely any room for an AIO, but you know that when you buy it. Still easy to build in and it looks good, but the lack of RGB freedom and fan noise (fans also barely push any air) made me want an upgrade. As a first time builder, this case was great. Came with ties and plenty of spare screws. Lots of room for cable management so I had no issues. I was worried about airflow given the glass but the fans work great and the case stays cool. Some minor gripes are that it didnt come with a standoff adapter so I had to use pliers, which chipped the paint. That said, idk how commonly those are included anyway. Also, the fan lights arent addressable and clicking the button 16 times to switch the light option isnt ideal. As far as the most important aspects go, this case works great for me

  • Tamara

    > 3 day

    This was my first PC build and i chose the case because of the name Genesis, easy and enough space for my power supply and motherborad. I expected a few flaws considering the price but it did not disappoint me and love looking at it while im playing or just checking my emails.

Genesis Large BannerGenesis Large Banner

Introducing the revamped Apevia Genesis series, a computer mid tower case which brings high standards to PC gamers with its upgraded features, impeccable functionality, and captivating aesthetics. This case combines a clear tempered glass and clean minimalistic front panel with 47 airflow vents, showcasing four vibrant 120mm ARGB fans that provide optimal cooling to your PC components. With both inner and outer RGB rings, these fans offer a dazzling display of 366 color modes, effortlessly controlled by the LED button on top. The fans are also compatible with ARGB motherboard software, thanks to the included 3pin ARGB connector, enabling seamless RGB lighting synchronization. Switching between the 366 RGB lighting modes and ARGB motherboard sync is as easy as a 5-second press on the LED button (or until you see a white flash blink on the fans). The top panel offers convenient access with two USB 3.0 ports, Power LED/HDD LED indicators, and audio jacks. The full-size tempered glass door, featuring a magnetic swivel-open design, provides effortless component access and a beautiful panoramic view of your setup. Supporting graphics cards up to 360mm in length, the Apevia Genesis series ensures hassle-free installation with its upgraded removable screw-in PCI-E slots (Non-punch out PCI-E slots). Choose from three striking color options: Black, White, or Pink and embrace the next level of gaming.

Apevia Genesis Series Mid Tower Highlights

Genesis RGB FanGenesis RGB Fan

Genesis Main ViewGenesis Main View

Genesis Front ViewGenesis Front View

4x Quiet Illuminating Apevia Pre-Installed 120mm ARGB Fans

Play through 366 lighting modes via top I/O panel using the “LED” button. The Apevia Genesis mid tower comes with three RGB fans on the front and one RGB fan on the rear to deliver excellent airflow right out of the box.

The ARGB fans include a 3pin motherboard cable allowing you to sync RGB with your motherboard RGB software (Only compatible with ARGB motherboards). Press down on "LED" button on the top panel for 5 seconds (Until the case fans blink a white flash) to toggle between 366 RGB modes and motherboard RGB sync

Includes Door Swivel Style Magnetic Glass Side Panel

This case includes a door swivel style magnetic glass side panel providing a premium appearance while allowing easy access to your components with a light pull on the handle.

The door swivel feature allows you to open the side panel without the risk of accidently dropping the tempered glass side panel. The magnet on the side panel is great for securing the glass side panel shut without needing additional screws.

Clean Minimalistic Front Panel Features A Full Sized Tempered Glass Panel & 47 Airflow Vents

The streamlined & simplistic front panel has a full sized glass panel with 47 airflow vents to show off the dazzling RGB fans while also providing optimal airflow to components.

The front panel has no cables connected to the PC to allow hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove). The dark tinted tempered glass is a great way to stealth the cables while showcasing the RGB lights.

Genesis Top / Side ViewGenesis Top / Side View

Genesis Side ViewGenesis Side View

Genesis Back ViewGenesis Back View

Minimalistic Front Panel I/O Design On The Side With Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust Filter

The front panel I/O design comes with a power button, bright power LED light, hard drive LED light, LED RGB Switch button, 2x 3.0 USB port, and HD audio ports (Speaker / Headphone) on the side. (This allows the front I/O cables to stay hidden from the side glass view).

The large magnetic dust filter on the top panel is removable to allow fast easy cleaning and reduces dust from entering inside the case.

Large Spacious Case Allows For A Great Experience Building & Cleaning Your PC

  • Supports standard ATX, Micro-ATX, and Mini-ITX motherboards, 2x USB3.0 / HD Audio ports, and improved cable management.
  • Supports video cards up to 360mm in length & CPU coolers up to 165mm in height
  • Room for up to six 120mm fans (3 fans at the front, 2 fans at top, 1 fan at the rear)
  • Front panel water cooling options: 120mm/240mm/280mm/360mm
  • Rear panel water cooling options: 120mm
  • Drive Bay Support : 2x 3.5" HDD / 2x 2.5" SSD

Removable Screw In PCI-E Slots (Non-Punch Out PCI-E Slots) Allows For Easy GPU Installation

  • Removable screw in PCI-E slots (Non-punch out PCI-E slots) for easy GPU installation and allows you to put back slot covers to adjust your final GPU position
  • 1x Full sized door swivel style magnetic tempered glass side panel on the left side and 1x full size metal side panel on the right side
  • PSU cage is approximately 9 inches
  • Comes with screw bag and easy to understand users manual to help with installation
Genesis Dimensions InfographicGenesis Dimensions Infographic

Apevia Genesis Mid Tower Specifications

Model Name Genesis-WH
Case Material Metal
Color WHITE (WH)
Motherboard Size Standard ATX / Micro ATX / ITX
Window Full Size Door Swivel Style Magnetic Glass Side Panel / Tempered Glass Front Panel
Drive Space 2x3.5" (hidden) / 2x2.5" (hidden)
Motherboard Size Up To 11" x 12"
Expansion Slots 7
Front Panel Switch Power / Fan LED Switch
Front Access Ports 2 x USB 3.0, 1x HD Audio Ports
Cooling Fan Space Up to 6 x case fans: 3 x 120mm RGB fan (included) - front / 2 x 120mm fan - top (optional) / 1 x 120mm RGB fan - rear (included)
Video Card Length Up to 360mm
CPU Cooler Height Up to 6.25"
Product Weight 14.3 lbs
Product Dimensions (DxWxH) 14.56" x 8.26" x 17.12"

Related products

Shop
( 2175 Reviews )
Top Selling Products