Apevia Genesis-WH Mid Tower Gaming Case with 2 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 4 x RGB Fans, White Frame

(1898 Reviews)

Price
$48.59

Style
Quantity
(50000 available )

Total Price
Share
92 Ratings
42
23
11
7
9
Reviews
  • Caleb

    > 3 day

    EDIT: After a year still a good value case, but not great. Rear fan started to make a noise that was obnoxiously loud and would not go away despite anything I tried. Case is also a bit small, barely any room for an AIO, but you know that when you buy it. Still easy to build in and it looks good, but the lack of RGB freedom and fan noise (fans also barely push any air) made me want an upgrade. As a first time builder, this case was great. Came with ties and plenty of spare screws. Lots of room for cable management so I had no issues. I was worried about airflow given the glass but the fans work great and the case stays cool. Some minor gripes are that it didnt come with a standoff adapter so I had to use pliers, which chipped the paint. That said, idk how commonly those are included anyway. Also, the fan lights arent addressable and clicking the button 16 times to switch the light option isnt ideal. As far as the most important aspects go, this case works great for me

  • Obrian

    > 3 day

    Product fits my build just fine if i have any complaints is enough room to cable manage in the back besides that i love it

  • John

    > 3 day

    My wife loves the case. It does not have the best cable routing, but it was less than $100. It is a hard case to beat in the price range. I do not recommend SATA Drives though. They are not the easiest to install. It looks like it should have slide mounts, but mine did not. So I skipped the HDD and stuck to m.2 drives. I had an issue with the LEDs coming on. Turns out it was my fault, there is a little white adapter that says Isolated Interface it did not connect to the fans but was at the end of the daisy chain. At some point I removed it during install and the fan LEDs will not work without it. Over all I am satisfied with this case at this price.

  • JennRose

    Greater than one week

    Beautiful case. Love it. I got the Genesis 4 rgb fan, Pink Version at 83.00. Its a beautiful case. Made Very well. Good air flow. Plenty of room. Plenty of spots to attach drives and other peripherals. Nice options. Gorgeous RGB. Beautiful glass panels. Shipped in nice and safe packaging. Instructions included were adequate, as good as youre gonna get, but they were more than enough so long as you scan thru them 1st then refer if needed. Was EASY to install everything. Wire Management was also a Breeze. RGB is stunning. Case fans are quite nice and i appreciate the shock cushions at the screw holes. Im a experienced pc builder, but I would say this case is fairly Beginner friendly, just take a few minutes and gameplan your wire management and dont lock anything in until you are almost done, sometimes when you get into it, a better way may present itself. Just take your time and I feel anyone can build in this case. Magnetic covers are both nice and well made. Plenty of USB ports Really looks nice Pros: Gorgeous RGB Fair Price Gorgous window panels Easy to wire manage and install parts Plenty of Hardware included Good enough Instal Manual Plenty of USB ports in front/top Has plenty of spots to mount storage drives, either show them off or hide them Plenty of room Case is Sturdy and well made. Good materials and metal. Does not look or feel cheap. Air flow is above average, not perfect, but really good. Case is quiet Was easy to put back panel back on after i installed everything, no issues at all. Case came wired neatly and the power/rgb wires were clearly marked and easy to plug into Motherboard Plenty of options and routes for Wire management. Cons- Really hard to find any. The case fans being proprietary is the one gripe I have, not end of world, especially if you can replace them down the road at a fair price Not a con, but just word of caution, When removing glass panels, make sure to keep hand at base, its very easy for the panel to slide/push off base when removing them and thus it could drop and one risks damaging them, Be careful- Obviously So long as this case remains at or close to 85.00, I HIGHLY Recommend this. Im very happy with mine.

  • Jimmy

    > 3 day

    Order better RGB fans. 2 of mine had random RGB lights flickering. Other than that the case is awesome! And it was easy to put together

  • Reviewrrr

    > 3 day

    The reason this isn’t a 5 star is because of the rgb, the colors on the fans are no longer the same color anymore & some turn off when I try to keep clicking thru different colors, they also used to turn off when I went through all of the colors, but now they don’t & they only turn off when I turn the pc off

  • Julian

    > 3 day

    Decent budget case, with decent enough air flow, and cable management. Only down side is the fans are molex only, and have a very non-standard RGB control.

  • Zara OTrimble

    > 3 day

    This pc case was adorable and a perfect fit for my setup when I first purchased it. I don’t know a lot about computers so I had my boyfriend build it for me. He has build 3-4 PCs prior to this so I had no doubt he was capable. However, problems arose as soon as we installed the motherboard. Screws weren’t lining up and he had such a difficult time getting it to stay in place. Everything was smooth after until we installed the cpu cooler. I have a fancy water cooler with RBG built in but no matter how we tried, we could not get both fans to fit in the case with the ram. The case is just too short for it to fit together. Another issue came with the graphics card, we had to take off part of it to get it to be accessible. I had pre-measured all of my components to be able to fit yet none of them were fitting together. So to sum it up, this pc case is perfect for those who don’t have a lot of fancy parts and have a small graphics card and motherboard, but very very difficult if you have bigger parts/gpu. I would probably spend more and get a pc case that is a normal size and can not give you serious stress. The fans are actually the one thing I enjoy about this case especially the 3 in the front and the case does get good airflow but like I said, beware the size when buying!!!

  • T.J.

    > 3 day

    I love my new case! It looks so cute with my pink setup. Was easy to assemble and has run great since installing all my parts into it!

  • Kayla

    > 3 day

    Love the color and construction. Wish it had been a tad bigger but over all a good buy.

Genesis Large BannerGenesis Large Banner

Introducing the revamped Apevia Genesis series, a computer mid tower case which brings high standards to PC gamers with its upgraded features, impeccable functionality, and captivating aesthetics. This case combines a clear tempered glass and clean minimalistic front panel with 47 airflow vents, showcasing four vibrant 120mm ARGB fans that provide optimal cooling to your PC components. With both inner and outer RGB rings, these fans offer a dazzling display of 366 color modes, effortlessly controlled by the LED button on top. The fans are also compatible with ARGB motherboard software, thanks to the included 3pin ARGB connector, enabling seamless RGB lighting synchronization. Switching between the 366 RGB lighting modes and ARGB motherboard sync is as easy as a 5-second press on the LED button (or until you see a white flash blink on the fans). The top panel offers convenient access with two USB 3.0 ports, Power LED/HDD LED indicators, and audio jacks. The full-size tempered glass door, featuring a magnetic swivel-open design, provides effortless component access and a beautiful panoramic view of your setup. Supporting graphics cards up to 360mm in length, the Apevia Genesis series ensures hassle-free installation with its upgraded removable screw-in PCI-E slots (Non-punch out PCI-E slots). Choose from three striking color options: Black, White, or Pink and embrace the next level of gaming.

Apevia Genesis Series Mid Tower Highlights

Genesis RGB FanGenesis RGB Fan

Genesis Main ViewGenesis Main View

Genesis Front ViewGenesis Front View

4x Quiet Illuminating Apevia Pre-Installed 120mm ARGB Fans

Play through 366 lighting modes via top I/O panel using the “LED” button. The Apevia Genesis mid tower comes with three RGB fans on the front and one RGB fan on the rear to deliver excellent airflow right out of the box.

The ARGB fans include a 3pin motherboard cable allowing you to sync RGB with your motherboard RGB software (Only compatible with ARGB motherboards). Press down on "LED" button on the top panel for 5 seconds (Until the case fans blink a white flash) to toggle between 366 RGB modes and motherboard RGB sync

Includes Door Swivel Style Magnetic Glass Side Panel

This case includes a door swivel style magnetic glass side panel providing a premium appearance while allowing easy access to your components with a light pull on the handle.

The door swivel feature allows you to open the side panel without the risk of accidently dropping the tempered glass side panel. The magnet on the side panel is great for securing the glass side panel shut without needing additional screws.

Clean Minimalistic Front Panel Features A Full Sized Tempered Glass Panel & 47 Airflow Vents

The streamlined & simplistic front panel has a full sized glass panel with 47 airflow vents to show off the dazzling RGB fans while also providing optimal airflow to components.

The front panel has no cables connected to the PC to allow hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove). The dark tinted tempered glass is a great way to stealth the cables while showcasing the RGB lights.

Genesis Top / Side ViewGenesis Top / Side View

Genesis Side ViewGenesis Side View

Genesis Back ViewGenesis Back View

Minimalistic Front Panel I/O Design On The Side With Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust Filter

The front panel I/O design comes with a power button, bright power LED light, hard drive LED light, LED RGB Switch button, 2x 3.0 USB port, and HD audio ports (Speaker / Headphone) on the side. (This allows the front I/O cables to stay hidden from the side glass view).

The large magnetic dust filter on the top panel is removable to allow fast easy cleaning and reduces dust from entering inside the case.

Large Spacious Case Allows For A Great Experience Building & Cleaning Your PC

  • Supports standard ATX, Micro-ATX, and Mini-ITX motherboards, 2x USB3.0 / HD Audio ports, and improved cable management.
  • Supports video cards up to 360mm in length & CPU coolers up to 165mm in height
  • Room for up to six 120mm fans (3 fans at the front, 2 fans at top, 1 fan at the rear)
  • Front panel water cooling options: 120mm/240mm/280mm/360mm
  • Rear panel water cooling options: 120mm
  • Drive Bay Support : 2x 3.5" HDD / 2x 2.5" SSD

Removable Screw In PCI-E Slots (Non-Punch Out PCI-E Slots) Allows For Easy GPU Installation

  • Removable screw in PCI-E slots (Non-punch out PCI-E slots) for easy GPU installation and allows you to put back slot covers to adjust your final GPU position
  • 1x Full sized door swivel style magnetic tempered glass side panel on the left side and 1x full size metal side panel on the right side
  • PSU cage is approximately 9 inches
  • Comes with screw bag and easy to understand users manual to help with installation
Genesis Dimensions InfographicGenesis Dimensions Infographic

Apevia Genesis Mid Tower Specifications

Model Name Genesis-WH
Case Material Metal
Color WHITE (WH)
Motherboard Size Standard ATX / Micro ATX / ITX
Window Full Size Door Swivel Style Magnetic Glass Side Panel / Tempered Glass Front Panel
Drive Space 2x3.5" (hidden) / 2x2.5" (hidden)
Motherboard Size Up To 11" x 12"
Expansion Slots 7
Front Panel Switch Power / Fan LED Switch
Front Access Ports 2 x USB 3.0, 1x HD Audio Ports
Cooling Fan Space Up to 6 x case fans: 3 x 120mm RGB fan (included) - front / 2 x 120mm fan - top (optional) / 1 x 120mm RGB fan - rear (included)
Video Card Length Up to 360mm
CPU Cooler Height Up to 6.25"
Product Weight 14.3 lbs
Product Dimensions (DxWxH) 14.56" x 8.26" x 17.12"

Related products

Shop
( 2217 Reviews )
Top Selling Products