Apevia Genesis-WH Mid Tower Gaming Case with 2 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 4 x RGB Fans, White Frame
-
Maximus Cole
> 3 dayThe case itself looks pretty, ours came with a few scuffs around the case but it was not super noticable. Installing a modular power supply is a huge pain due to the lack of space, the hard drive bay is not removable, and make sure you have a molex cable on your power supply since the fans are daisy chained and go directly to power supply through molex and not the motherboard. The metal used is very thin and does not feel very sturdy but it does hold up and the dust filters are just cut outs and feel cheaply made. Besides the lack of space and a few things that make the case seem cheap its fairly pretty once set up. Definitely go with a more reputable brand like NZXT if you want a case that is not pink but for a pink case thats all it has going for it.
-
Rico M.
> 3 dayThis is a pretty solid case and I been pretty content with it. However I cant feel some parts of it are a bit cheap. The outer case is a bit thinner than I would like it to be and uses cheaper screws than would I prefer to use on my motherboard. However if you take time with this case and maintain cable management its a very good case. Just know you are sacrificing build quality for aesthetic, and for me thats okay in my book.
-
Ana Murillo
> 3 dayI like how beautiful this case is. It was fairly easy to assemble other than the fact that the cable neceesary to connect the lights to the power supply was not included so if you dont have on you will need to buy one yourself which is a little inconvient.
-
Stephanie White
> 3 dayBought thinking it could fit my rtx 3090. Just BARELY didn’t fit, but i ended up taking the fans out and putting it in my new case
-
Vivian
13-06-2025So cute! very nice shade of pink, a little more pastel in real life than in the picture. the cables were kind of crazy when i opened it. the side panel bends too easily though. you also gotta be real good at cable management to fit all your cables, it was kind of a nightmare trying to lay my cables as flat as possible because the space between the panel and the cables was way too little. Other than that, its cute and works great!
-
J. Cornett
> 3 dayBought this for the extra fans, and the coolness of the LEDs. Hubby followed the instructions, and the unit wouldnt power up. We ended up taking to a tech, and the fans/LEDs were overwhelmed by the power supply, causing the whole system to shut down. We did finally get it to where the fans will work, and the system powers up, but the LEDs wont. Would have returned, but no longer had the box. Also didnt realize when ordering this doesnt have spaces for disc drives.
-
D. Edward
Greater than one weekDead on arrival. Will not turn on. Do not get.
-
Angel
> 3 dayI was really excited because this case was the final piece for my pc and I loved the design but it came in extremely damaged. I wanted a replacement but Amazon is only willing to give me a refund
-
Kali
> 3 dayOne of the fans wires came broken
-
Jordan Haviland
> 3 dayI actually got this case to go with my wifes first build. She loves the case itself, with the RGB fans and how easy it was to set up. Only problem is once I put the AIO inside, the RGB RAM sticks dont fit. Unfortunately the height of the interior makes it to where its one or the other. So I had to make due with non-RGB RAM.
Introducing the revamped Apevia Genesis series, a computer mid tower case which brings high standards to PC gamers with its upgraded features, impeccable functionality, and captivating aesthetics. This case combines a clear tempered glass and clean minimalistic front panel with 47 airflow vents, showcasing four vibrant 120mm ARGB fans that provide optimal cooling to your PC components. With both inner and outer RGB rings, these fans offer a dazzling display of 366 color modes, effortlessly controlled by the LED button on top. The fans are also compatible with ARGB motherboard software, thanks to the included 3pin ARGB connector, enabling seamless RGB lighting synchronization. Switching between the 366 RGB lighting modes and ARGB motherboard sync is as easy as a 5-second press on the LED button (or until you see a white flash blink on the fans). The top panel offers convenient access with two USB 3.0 ports, Power LED/HDD LED indicators, and audio jacks. The full-size tempered glass door, featuring a magnetic swivel-open design, provides effortless component access and a beautiful panoramic view of your setup. Supporting graphics cards up to 360mm in length, the Apevia Genesis series ensures hassle-free installation with its upgraded removable screw-in PCI-E slots (Non-punch out PCI-E slots). Choose from three striking color options: Black, White, or Pink and embrace the next level of gaming.
Apevia Genesis Series Mid Tower Highlights
|
|
|
|
|---|---|---|
4x Quiet Illuminating Apevia Pre-Installed 120mm ARGB FansPlay through 366 lighting modes via top I/O panel using the “LED” button. The Apevia Genesis mid tower comes with three RGB fans on the front and one RGB fan on the rear to deliver excellent airflow right out of the box. The ARGB fans include a 3pin motherboard cable allowing you to sync RGB with your motherboard RGB software (Only compatible with ARGB motherboards). Press down on "LED" button on the top panel for 5 seconds (Until the case fans blink a white flash) to toggle between 366 RGB modes and motherboard RGB sync |
Includes Door Swivel Style Magnetic Glass Side PanelThis case includes a door swivel style magnetic glass side panel providing a premium appearance while allowing easy access to your components with a light pull on the handle. The door swivel feature allows you to open the side panel without the risk of accidently dropping the tempered glass side panel. The magnet on the side panel is great for securing the glass side panel shut without needing additional screws. |
Clean Minimalistic Front Panel Features A Full Sized Tempered Glass Panel & 47 Airflow VentsThe streamlined & simplistic front panel has a full sized glass panel with 47 airflow vents to show off the dazzling RGB fans while also providing optimal airflow to components. The front panel has no cables connected to the PC to allow hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove). The dark tinted tempered glass is a great way to stealth the cables while showcasing the RGB lights. |
|
|
|
|
|---|---|---|
Minimalistic Front Panel I/O Design On The Side With Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust FilterThe front panel I/O design comes with a power button, bright power LED light, hard drive LED light, LED RGB Switch button, 2x 3.0 USB port, and HD audio ports (Speaker / Headphone) on the side. (This allows the front I/O cables to stay hidden from the side glass view). The large magnetic dust filter on the top panel is removable to allow fast easy cleaning and reduces dust from entering inside the case. |
Large Spacious Case Allows For A Great Experience Building & Cleaning Your PC
|
Removable Screw In PCI-E Slots (Non-Punch Out PCI-E Slots) Allows For Easy GPU Installation
|
