Apevia Genesis-WH Mid Tower Gaming Case with 2 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 4 x RGB Fans, White Frame

(1898 Reviews)

Price
$48.59

Style
Quantity
(50000 available )

Total Price
Share
92 Ratings
42
23
11
7
9
Reviews
  • Zara OTrimble

    > 3 day

    This pc case was adorable and a perfect fit for my setup when I first purchased it. I don’t know a lot about computers so I had my boyfriend build it for me. He has build 3-4 PCs prior to this so I had no doubt he was capable. However, problems arose as soon as we installed the motherboard. Screws weren’t lining up and he had such a difficult time getting it to stay in place. Everything was smooth after until we installed the cpu cooler. I have a fancy water cooler with RBG built in but no matter how we tried, we could not get both fans to fit in the case with the ram. The case is just too short for it to fit together. Another issue came with the graphics card, we had to take off part of it to get it to be accessible. I had pre-measured all of my components to be able to fit yet none of them were fitting together. So to sum it up, this pc case is perfect for those who don’t have a lot of fancy parts and have a small graphics card and motherboard, but very very difficult if you have bigger parts/gpu. I would probably spend more and get a pc case that is a normal size and can not give you serious stress. The fans are actually the one thing I enjoy about this case especially the 3 in the front and the case does get good airflow but like I said, beware the size when buying!!!

  • Sarah Quinnelly

    > 3 day

    Really beautiful case! A bit smaller than expected but that’s fine. The bottom chamber that holds the power supply is a bit tight so prepare for frustration with getting all your wires plugged in. Also where they want the SSD to be mounted doesn’t give enough clearance for the SATA cable so i mounted it elsewhere. Cable management is a little odd especially for a first time builder but nothing awful! Didn’t have any issues with the fans. Absolutely am happy with this case as there are almost zero pink cases on the market!

  • cesar dangelo

    > 3 day

    First off, this case is awesome! the installation was a little eh, and the fans already attached to the case come with the cables all tangled up, but with proper amount of time this is not hard to manage. OH! and also, for new pc builders, this applies to any system, after swap or installation of components you might notice the mother board has power and so do all other component, but you dont get usb or display. i fixed this by making sure i was grounded and shutting off the power fully from the system, and removing the BIOS for about 30 seconds, press down the power button for a good minute, and then turn on the system.

  • Darko

    > 3 day

    1. the quality is great 2. the rgb fans are stunning ( so many options to configure ) 3. great airflow ( temperatures are cool enough ) 4. litle tight on the back site for cable managment, but who knows how to do it the time and effort will pay off. 5. enough room on the front side for 240mm radiator

  • Mohammad Eid

    > 3 day

    This is a great case, perfect size, great RGB options and build quality. The ONLY thing I did not like is how the brackets need to be removed before putting in motherboard or u risk damaging it. The brackets are also welded not screwed which is annoying. When it came in some of the glass panel screws were messed up so I emailed them and got a new set of screws THE NEXT DAY. I would definitely recommend this case and company. If youre building a pc with this case would also recommend and extra exhaust fan. 10/10

  • Alexandra Hust

    > 3 day

    Its a very pretty case but the airflow is sub optimal. I added two additional arctic fans to help with the temps as the glass panel on the front, while looks cool, restricts too much airflow for proper cooling. at least, for my preference. If i was building a pc or replacing my current case id buy one that had a mesh front or had more real estate to pull air from rather than the sides of the front panel. The main reason I bought it 2 years ago was mainly because I liked the look, but I run it without the front panel... so the look isnt as classy looking while Im using it. Im always a tiny bit disappointed when i look at it.

  • Kayla

    > 3 day

    Love the color and construction. Wish it had been a tad bigger but over all a good buy.

  • Andrea Contreras

    08-06-2025

    Made my wife a pc for her future YouTube videos, it’s actually fire I kinda wanna keep it lol great color easy to work inside, recommend for sure.

  • GRAA17

    > 3 day

    Great item!!

  • Kristian Paucek

    > 3 day

    It’s a tight fit and cable management is meh but it’s still a fantastic case all around a bang for your buck. Love the case and how everything turned out.

Genesis Large BannerGenesis Large Banner

Introducing the revamped Apevia Genesis series, a computer mid tower case which brings high standards to PC gamers with its upgraded features, impeccable functionality, and captivating aesthetics. This case combines a clear tempered glass and clean minimalistic front panel with 47 airflow vents, showcasing four vibrant 120mm ARGB fans that provide optimal cooling to your PC components. With both inner and outer RGB rings, these fans offer a dazzling display of 366 color modes, effortlessly controlled by the LED button on top. The fans are also compatible with ARGB motherboard software, thanks to the included 3pin ARGB connector, enabling seamless RGB lighting synchronization. Switching between the 366 RGB lighting modes and ARGB motherboard sync is as easy as a 5-second press on the LED button (or until you see a white flash blink on the fans). The top panel offers convenient access with two USB 3.0 ports, Power LED/HDD LED indicators, and audio jacks. The full-size tempered glass door, featuring a magnetic swivel-open design, provides effortless component access and a beautiful panoramic view of your setup. Supporting graphics cards up to 360mm in length, the Apevia Genesis series ensures hassle-free installation with its upgraded removable screw-in PCI-E slots (Non-punch out PCI-E slots). Choose from three striking color options: Black, White, or Pink and embrace the next level of gaming.

Apevia Genesis Series Mid Tower Highlights

Genesis RGB FanGenesis RGB Fan

Genesis Main ViewGenesis Main View

Genesis Front ViewGenesis Front View

4x Quiet Illuminating Apevia Pre-Installed 120mm ARGB Fans

Play through 366 lighting modes via top I/O panel using the “LED” button. The Apevia Genesis mid tower comes with three RGB fans on the front and one RGB fan on the rear to deliver excellent airflow right out of the box.

The ARGB fans include a 3pin motherboard cable allowing you to sync RGB with your motherboard RGB software (Only compatible with ARGB motherboards). Press down on "LED" button on the top panel for 5 seconds (Until the case fans blink a white flash) to toggle between 366 RGB modes and motherboard RGB sync

Includes Door Swivel Style Magnetic Glass Side Panel

This case includes a door swivel style magnetic glass side panel providing a premium appearance while allowing easy access to your components with a light pull on the handle.

The door swivel feature allows you to open the side panel without the risk of accidently dropping the tempered glass side panel. The magnet on the side panel is great for securing the glass side panel shut without needing additional screws.

Clean Minimalistic Front Panel Features A Full Sized Tempered Glass Panel & 47 Airflow Vents

The streamlined & simplistic front panel has a full sized glass panel with 47 airflow vents to show off the dazzling RGB fans while also providing optimal airflow to components.

The front panel has no cables connected to the PC to allow hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove). The dark tinted tempered glass is a great way to stealth the cables while showcasing the RGB lights.

Genesis Top / Side ViewGenesis Top / Side View

Genesis Side ViewGenesis Side View

Genesis Back ViewGenesis Back View

Minimalistic Front Panel I/O Design On The Side With Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust Filter

The front panel I/O design comes with a power button, bright power LED light, hard drive LED light, LED RGB Switch button, 2x 3.0 USB port, and HD audio ports (Speaker / Headphone) on the side. (This allows the front I/O cables to stay hidden from the side glass view).

The large magnetic dust filter on the top panel is removable to allow fast easy cleaning and reduces dust from entering inside the case.

Large Spacious Case Allows For A Great Experience Building & Cleaning Your PC

  • Supports standard ATX, Micro-ATX, and Mini-ITX motherboards, 2x USB3.0 / HD Audio ports, and improved cable management.
  • Supports video cards up to 360mm in length & CPU coolers up to 165mm in height
  • Room for up to six 120mm fans (3 fans at the front, 2 fans at top, 1 fan at the rear)
  • Front panel water cooling options: 120mm/240mm/280mm/360mm
  • Rear panel water cooling options: 120mm
  • Drive Bay Support : 2x 3.5" HDD / 2x 2.5" SSD

Removable Screw In PCI-E Slots (Non-Punch Out PCI-E Slots) Allows For Easy GPU Installation

  • Removable screw in PCI-E slots (Non-punch out PCI-E slots) for easy GPU installation and allows you to put back slot covers to adjust your final GPU position
  • 1x Full sized door swivel style magnetic tempered glass side panel on the left side and 1x full size metal side panel on the right side
  • PSU cage is approximately 9 inches
  • Comes with screw bag and easy to understand users manual to help with installation
Genesis Dimensions InfographicGenesis Dimensions Infographic

Apevia Genesis Mid Tower Specifications

Model Name Genesis-WH
Case Material Metal
Color WHITE (WH)
Motherboard Size Standard ATX / Micro ATX / ITX
Window Full Size Door Swivel Style Magnetic Glass Side Panel / Tempered Glass Front Panel
Drive Space 2x3.5" (hidden) / 2x2.5" (hidden)
Motherboard Size Up To 11" x 12"
Expansion Slots 7
Front Panel Switch Power / Fan LED Switch
Front Access Ports 2 x USB 3.0, 1x HD Audio Ports
Cooling Fan Space Up to 6 x case fans: 3 x 120mm RGB fan (included) - front / 2 x 120mm fan - top (optional) / 1 x 120mm RGB fan - rear (included)
Video Card Length Up to 360mm
CPU Cooler Height Up to 6.25"
Product Weight 14.3 lbs
Product Dimensions (DxWxH) 14.56" x 8.26" x 17.12"

Related products

Shop
( 2978 Reviews )
Top Selling Products