DeoxIT D100L-25C Precision Needle Applicator, More Than A Contact Cleaner, 25 mL, Pack of 1
-
Antonio Marra
> 24 hourOk
-
Sherron S.
> 24 hourVery cost effective
-
Em K
> 24 hourI like the control the needle applicator gives to this great DeOxIT product when I dont use their spray. Wonderful product for cleaning and preventive application.
-
Jerry Cersovsky
> 24 hourWorks good and very pin point application nozzle
-
Don B.
> 24 hourHave used this stuff for years. Its by far the best contact cleaner Ive ever used in my 30+ years in all fields of electronics. A bit pricy but worth every penny! And works far Superior on sliding potentiometers as its a bit of lubricant as well. I have actually used to oil motors when I had nothing else handy and works great for that as well.
-
Vince1
> 24 hourLove this stuff! Brings old contacts to life.
-
Brendan D.
> 24 hourI needed this so that I could clean out the pots on my electric guitars volume and tone knobs and pickup selector. They were getting really scratchy-sounding. I did my research on how to solve the problem, and I found out that I needed some contact cleaner. I first tried some of
-
Lee P
> 24 hourgreat stuff! Much better than hardware contact cleaner
-
Jasmundo
> 24 hourI have been using Caig Lab products since the 1980s! Originally, their deoxydizing product was called Cramolin. They had to reformulate it to conform to new regulations. It is now called DeOxit. Available in 5% spray can (D5), or in 100% concentrate (D100L), accept no substitutes. Go to the Caig Lab web site and see which companies use Caig Lab products, including DeOxit. (Tip: one of them is NASA!)
-
Bud_Dude
> 24 hourUsed for restoring vintage ham radio gear, cleaning potentiometers, rotary switches, etc. Its amazing stuff. One swipe with a cotton tipped swab on switch contacts or a few drops in an old pot and theyre like new... Its expensive, but it does work, use sparingly.
CAIG DeoxIT D100L-25C, Cleaner/Deoxidizer/Rejuvenator/Lubricant/Protectant
WHY is DeoxIT Unique? Ever wonder why electronic or electrical devices have glitches, intermittents or data errors, or wonder how you can prevent this from happening.
ANSWER: Most of the time it is caused by ONE of the thousands of metal connections in the system or device. All electronic connections deteriorate which cause reduced performance or perhaps total failure. Simple contact “cleaners” wash away dirt, dust, and grime, but prove ineffective at removing oxidation and surface sulfides. These tough contaminants actually attach to and become an integral part of the contact metal. This issue causes increased unnecessary service calls for covered repairs that could have been prevented, translating into literally millions of dollars of lost revenue for service organizations. The only true method of eliminating oxidation and surface sulfides is by chemical action and reaction. This is one aspect separating DeoxIT products from all other products, putting it in a class by itself. SOLUTION: DeoxIT D-Series
WHY IS DEOXIT DIFFERENT?
Simple contact “cleaners” wash away dirt, dust, and grime, but prove ineffective at removing oxidation and surface sulfides. These tough contaminants become an integral part of the contact metal. The only true method of eliminating oxidation/surface sulfides is by chemical action and reaction. This is one aspect separating DeoxIT products from other products, putting it in a class by itself.
WHICH DEOXIT TO USE?
DeoxIT D-Series: General purpose for all metals DeoxIT Gold G-Series: Ideal for gold plated surfaces DeoxIT Shield S-Series: Severe environments DeoxIT Fader F-Series: Conductive plastics
Key Benefits
- “Bring Old Systems Back to Life!”
- Cleaner Audio - Clearer Video - Reliable Data
- Rejuvenates & Improves Connection
- Improves Signal Quality & Data Speeds
- Seals, Lubricates & Protects Surfaces
- Long-Lasting Reliability & Dependability
- Works When Others Do Not!
- Temperature Range -34 to 200 C
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| D100L-25C | DN5S-6N | G100L-25C | GN5S-6N | D100L-2DB | D50W | |
| DeoxIT Product | D100L-25C (Precision Needle Applicator) | DN5S-6N | G100L-25C (Precision Needle Applicator) | GN5S-6N | D100L-2DB | D50W |
| Use On | All metals | All metals | Ideal for gold surfaces | Ideal for gold surfaces | All metals | All metals |
| Flammable (until solvent evaporates) | No (100% concentrate) | Yes (Until solvent evaporates) | No (100% concentrate) | No (Quick-Dry/Non-Drip Formula) | No | No |
| Rejuvenates/Improves Conductivity | Yes | Yes | Yes | Yes | Yes | Yes |
| Deoxidizer/Cleaner Percentage | 20% | 20% | 0.50% | 0.50% | 20% | 20% |
| Safe on Metals & Plastics | Yes | Yes | Yes | Yes | Yes | Yes |
| Effective on Moving/Vibrating Surfaces | Yes | Yes | Yes | Yes | Yes | Yes |
| Cause Shorts between Pins/Surfaces | No | No | No | No | No | No |
| Reduces Fretting/Dendrite Corrosion (1-Good, 2-Excellent) | 1 | 1 | 2 | 2 | 1 | 1 |
| For Severe Environments (1-Good, 2-Excellent) | 1 (Very severe: Use DeoxIT Shield after cleaning) | 1 (Very severe: Use DeoxIT Shield after cleaning) | 1 (Very severe: Use DeoxIT Shield after cleaning) | 1 (Very severe: Use DeoxIT Shield after cleaning) | 1 (Very severe: Use DeoxIT Shield after cleaning) | 1 (Very severe: Use DeoxIT Shield after cleaning) |