Eapele Undermount Sink Repair Kit, Sink Brackets for Quick and Easy Installation for Fallen Sink Support
-
Diana Dias
> 3 dayIt was pretty easy to install.
-
Tim W
> 3 daySeemed to hold my sink better than the boards that were used originally.
-
Dr. Kirk Leffler
> 3 dayThe braces seems to work OK and are holding up my sink. Three of the provided screws failed during installation. I started all of the screws before tightening any of them. As I did this, the heads snapped off on 3 of them. I then had to drill out the remaining body of those screws and put in new ones. Do yourself a favor and throw away the package of screws that comes with this kit. They are complete junk.
-
Not a chance
> 3 dayLoved these sink supports for my newly replaced under mount metal sink. These are very adjustable for those tight areas. These arms reach up under the sink lip while the mount is down below the sink bowl. I just wish the 5/8” screws(more then enough) were 1/2”. Not many cabinet walls are 5/8” or more thick. I just glued 1/4” 3”x3” blocks on the inside of the cabinet where I installed the support arms to make up the screw length difference. I guess buying 1/2” screws would of worked but I wanted to use the 5/8” for a more specific mount with this installation.
-
Franklin Sampley
> 3 dayOur sing fell on one side and we found the builder had not put all five support brackets in, plus the stone was too drilled out to replace the support bracket. I got these and had them installed and they seem to really support the sink well. They seemed easy enough to install, and the sink has been full of holiday dishes and water and didnt budge. If you have an under mount sink Id recommend these as they seem better than relying on the clips alone.
-
Chris
> 3 dayEasy to install and great support
-
Joe
> 3 dayDoes the job to support sink. Not too hard to install.
-
Deputy Dog rs
> 3 dayFairly easy to install and works.
-
jdunn
> 3 dayThis worked great. Our stainless steel sink tub fell off our granite countertops so we used this to repair the sink so it would not fall again. The back corner ones where difficult to get at but possible to do.
-
Tom Lane
> 3 dayOnly when I noticed a small gap forming between my undermount sink and my countertop did I learn that it was installed using an adhesive without a physical mechanical support. This product solves that problem. It is long enough to give me plenty of room to mount it underneath my very deep kitchen sink and provides solid support.