Eapele Undermount Sink Repair Kit, Sink Brackets for Quick and Easy Installation for Fallen Sink Support

Used this to re-mount a sink which had fallen. Old mounts were epoxied to the granite countertop and had failed. These brackets are far superior to what I was replacing. I had to improvise a little because the sink was in a corner cabinet. But I just used some 2x4s to build out the back wall of the cabinet so I had something to secure the brackets to.

Excellent support for undermount sink, I highly recommend to use these support, it makes a world of difference.

This product will work well. The screws were a challenge. I suggest predrilling the holes as they would not cling to a magnetic bit holder...very frustrating. A great concept.

This is a great product for under mount sinks on granite. Installer was impressed with this and said he never saw anything like it and would recommend it to all his customers. Silicone is helpful, but will not hold forever! The install went quicker since the silicone did not need to dry.

I had no idea how I was going to get this custom under mount sink attached without having to drill into the quartz countertop and then I found this product and it made my life so much better. I was able to easily mark the areas needed to install the parts and it all fit and worked out perfectly. buy it.

After researching a lot of products to repair my sink that had come loose from the granite countertop, I chose this particular one. It was easy to install, the directions were clear, and did the job. I don’t know why contractors don’t use these instead of just gluing a sink in place. Overtime, the glue will come apart from the Undermount and the result will be a fallen sink. Thank goodness we noticed this before it ripped the plumbing out.

These brackets work great! I loved the design and the ability to tighten them up a little after install. I set mine about 3/4 travel so I could lower the sink, apply sealant, then tighten again. I used double backed tape on the flanges to hold the brackets in place while installing the mounting screws. All worked great with no problems!

great sturdy product but I blocked it in with 1X3 rather than depend on the sturdiness of the cabinet material...ours were melamine

Pretty easy install. Marked 2 holes and drilled. Attached with 2 screws, drilled other holes and attached with final 2 screws. Spread silicone around sink top and gently tightened evenly. Seems to be very solid after 24 hour dry time for silicone. Would recommend and use again if I ever encounter another dropped sink.

It was pretty easy to install.