













EasyStart MicroAir 368 Soft Start Home Commercial Easy Start (ASY-368-X48), Air Conditioner Soft Start Works with Generator, Start Air Conditioners at Less Power, Home and Commercial Use - Grey
-
WMB
> 24 hourThis was an excellent investment at $389. The AC start up current pull was in the 70ies. After installation it dropped to mid 30ies on my 4 ton ac. It was easy to install. Watch the Utube vid for easy instructions. The reason for purchase was so my 11,000 watt generator would start my AC. It worked great.
-
Tom M.
> 24 hourVery well made. Instructions are very good. Easy to install. Seems to work as described. Have not tried to start my generator yet for my 4 ton ac, but will try soon. The blue tooth features is nice, but doesnt show same amperage as my clamp on ammeter reading inrush current. It reads higher on inrush and running amps, but at least it reduces current as is supposed to do. 5/22/23 Hooked up my Generac XT8000E generator today, and my 4 ton Lennox started fine with it, along with being connected to my home natural gas supply. My clamp-on ammeter showed starting amps at 34.5A. I am ready now for a power outage.
-
T. Gratehouse
> 24 hourTook awhile to actually get. Installed easily and works as intended.
-
Alan
> 24 hourMy a/c startup amperage dropped by 61%. I was extremely happy to see that drop. Next I will be testing the emergency generator running the a/c as well as most of the normal appliances in the house. I have run the a/c with my generator before but only the a/c out of necessity but I sweat all the time it was on for fear of damaging the a/c or the generator. Now that the a/c draws 61% less startup amps I am confident everything except our electric stove will run on emergency generator which is 7500/9500 watts.
-
Filboid Studge
> 24 hourDuring Hurricane Ida, my house was without power for approximately 2 weeks, after which I realized it would have been far more comfortable if I could have run the central A/C using my generator. My two-stage Lennox heat-pump pulls between 2000-3800 watts while running (8-15A), but the startup wattage is about 12000 watts (~48A), which is far more than my
-
D Murph
> 24 hourEasy to install. Works as advertised. Seller was great, Got my order sooner than expected.
-
CincyTom
> 24 hourTook my 4 ton AC from inrush amps of 98 to 40. This really works!
-
Jonathan Nguyen
> 24 hourWe have a 3 ton central AC unit and I decided to switch it to our offgrid system running on a 6K split phase growatt inverter. Everytime when the AC kicked on, the inverter was overloaded and shutoff. After searching around, I decided to buy this unit to test it it out and I am more than happy with the result. Smooth starts of inverter after learning and now the start peak is around 23A which is great. Highly recommended for large AC and offgrid system.
-
T. Connell
> 24 hourI received the product and quickly noticed how well made it was. Installation was a breeze with only four wires, took me about ten minutes, that included me putting the required ends on. I had one question and sent a text to support. They quickly called me back, when I say quick I mean less than 3 minutes. They walked me through the setup wire by wire to confirm it was installed correctly. My start up Amos was 60 on my 3.5 ton unit. Now my start up amps is 24. Generator now powers my entire house with the ac unit.
-
Lyddie D
> 24 hourThis thing came without quick connects or ANYTHING to set it up. Customer Support didnt reply when I requested help on what size quick connectors, size of mounting screws, etc. This is very expensive and Im really disappointed that I now have to go searching for the parts to install. **UPDATE: Customer Support contacted me the next day & provided an install kit and instructions on wire connections.