Epson Home Cinema 3200 4K PRO-UHD 3-Chip Projector with HDR

This works really well. Easy to setup and use. Excellent picture. Brightness is really good. Kind of pricey but for the quality it’s worth it.

If the higher end versions are priced out of range for you, this 3800 model might be in your wheel house. If you are looking for a better than average 4K TV, this is probably the area you want to look. The picture quality is superb. Very impressive for a projector. What I like most about it is the versatility in its projection size. So no matter what room size you are sitting in, this Epson 4K projector will accommodate the size needed, whether on a wall or a screen. It is 3D capable, but you need to buy the accessories to accommodate it, but it can handle displaying. There are various audio inputs to use for sound bars or speakers to maximize the theater experience. While the unit is pretty big, its not improbably to move it around with careful handling for certain occasions, such as an outdoor viewing. There are a lot of features within to tune it to your home environment and displays well even in the daytime. Overall, if the other projectors are a little too much, I would go for this one as you will find the quality very comparable and worthy of show-off rights.

This is a TERRIFIC projector. Im a trial lawyer, and I bought it to display documents to the jury on a screen at trial. The old projector made it hard to tell whether someone had initialed a document or not. This one, by contrast, made the evidence clear and convincing, as we say in my line of work. Youll love it. You will also need to figure out some way to carry it around, because it is a big mother, but worth the heft.

Unit was well packaged and no damage to the shipping box. When I set it up the focus ring would not turn to adjust the focus. The zoom ring turned fine and zoomed in and out. Shifting the image up and down and side to side with the turn knobs worked. I called Epson tech support and got someone right away. They talked with me a few munities and said it was a hardware issue and return it.

Projectors have to serve a lot of different needs. Some people need them to be used in a brightly sunlit room during the day. Others need them for 3d movies. Others need the projector for text and images. All of us probably want a great picture and large screen wow experience. I have a dedicated theater room that is painted with dark brown walls and ceiling and blackout curtains. It is like a movie theater. I do not have to worry about brightness of the projector. That gives me some tradeoffs with this projector. This projector is EXCELLENT for a bright room that needs extra lamp power to overcome the brightness. For me, that means I can run in ECO mode and the fan is reduced and the brightness is still very good - and my blacks are better too. This is a pretty good projector for a theater room setup. It is also pretty good for a sunlit room setup as well, but you will experience tradeoffs. By running in full brightness mode at an insane 2900 lumens, the projector can actually be functional in a bright room. The fan will run a good deal more, and it will be noisier to overcome this - but it is better than having a weak picture. The colors are bright and saturated and the image is CRISP and CLEAR. For those who care about the details, it is not a true 4k picture, but for practical purposes and to many people, it is so well done that it gives the performance of a 4k picture at a fraction of the cost. Right now, a true 4k projector is VERY EXPENSIVE. The Epson Home Cinema 3800 4K PRO-UHD 3-Chip Projector with HDR gives you the look and feel of a true 4k image without the obscene price of a true 4k projector. It is large too - in most installed setups, this should not matter. If you are carrying it around as a portable unit, this could matter. Overall, this is a great budget choice projector that can handle very bright room installations (think of a living room with windows that dont get completely dark or a classroom or court room or business conference room.) If you are a true aficionado of high end projectors, this may fall a slight bit under the top end projectors, but it also falls a good bit under the prices of those projectors. I have a lot of friends who have MUCH CHEAPER projectors than this, so it is a fairly upper-mid-range projector and you will absolutely appreciate the many extras and higher performance of this projector. It does 3D and it will absolutely handle a bright room - feature that a great many people need and wish for. I would recommend it to anyone looking for a GREAT PROJECTOR at a price point of around $1,500. I would not hesitate to recommend it to family and friends and Epson is a great brand name and projectors are one of their EXCEPTIONAL product lines. One comment on that... Most companies are known for being really great at CERTAIN PRODUCTS. Epson is known for printer and another one of their excellent products is PROJECTORS. Right now, with the exit of Panasonic from the projector market, Epson is very possibly right there with Sony and maybe one other brand among the top-3 projector companies out there. You cannot go wrong with this projector in my opinion as long as you know the quirks and they dont affect your situation. If you have any questions, please feel free to reach out to me via my Amazon Profile and I will try to get back to you asap. I take great pride in trying to help others know which products are good and which ones to avoid. I feel like we can all help each other by doing a great job of letting others know our experience with the products we buy here on Amazon and I think it is very rewarding to know that I have helped someone choose the right product for their situation. Thank you so much for reading this review!

Great picture quality and features. Best decision and nice price ! Perfect

Steve went out of his way to help us out. We absolutely love the Epson 3800 Projector. Works great with my Bluetooth sound system. Just have it against my textured wall and the picture is good. I can’t wait for my screen to show up. Thanks for your help Steve at Hatchfield Co. Will buy from their company again in the future!

I think how you feel about this projector will depend largely on what you use it for. As a 4K video projector, and for the price, it is a reasonably good deal. I picked my 3200 up on sale at BestBuy. You will find the contrast unsatisfactory for dark scenes unless you have a blacked-out, light controlled room. Of course, good contrast always requires a blacked out room, but even so, the blacks on this are dark gray. For example, when playing Assassins Creed Origins, I cannot see my way around a crypt without having all other lights in the room off. HDR is not very noticeable, but is adjustable. You will notice the auto-iris kick in a moment after scene changes some times (this is Epsons attempt to make up for the lower contrast levels of this projector). I can live with this, happily, if the projector is only used for video. The projector is incredibly bright. No issues there. The crappy contrast may go unnoticed in a room without light control. In my basement, with no windows, I find it very bright in ECO mode, even nearly 1000 hours in. The lens shift feature blew my mind, and hugely simplifies installation without having to mess with keystone correction, which leaves the trapezoidal gray/black light around your picture. The worst part of this projector is focus. With video you may not notice, but since Ive been working from home for the last few months of COVID, I use this as a 142 monitor for programming, several hours a day every day. It is _impossible_ to get even focus across the screen with text. You can have one area sharp and another area dreadfully blurry, or you can have the entire thing slightly out of focus and rub your eyes all day long. Lest you think it may be caused by imperfections in my screen, or not having the projector perfectly centered...I can put a piece of paper in the out-of-focus area and walk back towards the projector 4-5 feet before that text is in focus. So, it isnt due to flatness of the screen. Tech support: Epson tech support has been good. When I finally bought and mounted a screen to verify it wasnt due to my uneven wall, they happily replaced my projector with a refurbished one via 2-day fedex, prepaid both ways. Unfortunately, the refurb was even worse for focus issues and had light scratches on the lens, so they overnighting a brand new one. The focus issue persists, so it seems to be common for this line -- or my setup is inexplicably wrong somehow. Epson does not have a way to trade-in/upgrade to something better, so Ill probably have to try to sell it on my own and take a loss. So, overall - acceptable for the price for movie night. Not acceptable for computer work. If you can afford to spend a little more for something closer to true 4K, with better focus and contrast, Id recommend doing so. **Update** I have been ceiling mounting this projector to keep it out of the way of people and reduce shadows from the same. The lens shift that was so delightful, seems to be a contributor to the focus issue. Switching to keystone correction instead of lens shift helps the focus, but it is still an issue. Also, keystone correction throws off the aspect ratio so the image no longer fits the screen - its either too wide, or I have to leave small dark strips at the top and bottom of the image. Finally, I unmounted the projector, put it in tabletop mode, and stacked boxes under it so the image is perfectly centered with no keystone and no lens shift. The center is stunning, but the side is STILL out of focus. Ive included a couple pictures from the panel alignment mode to show the focus difference from center to top-right (tabletop mode) when the projector is perfectly centered on a flat, professional screen.

I should have read up more on this model but there are no internal speakers. I planned to use external AV anyway, but just surprised it didn’t come with it. I am impressed with the picture quality and brightness though.

Review after about 300 hours of use. This projector replaced a JVC DLP (rebranded BenQ). The projector is ceiling mounted. Screen is a 110 16:9 ALR. Room is sorta light controlled - windows flank the screen. Lighting in the room is via multiple track heads on both sides of the room. Walls are white, so light from the track heads bounce everywhere. Adjustability: The ceiling in my viewing room is low - the centerline of the lens is below the top of the screen. On the JVC, the only way to get this to work was with some extreme keystone adjustment. The Epson has some easily accessible knobs that made lens shift adjustment extremely easy - especially when working on something hanging over your head. The lens on the JVC was in the middle of the projector whereas the lens on the 3800 was offset to one side. The lens shift meant the I didnt have to mess around with moving the projector mount a few inches to the side. Theres a little play in the knobs that is a bit annoying at first but you get use to it quickly. The amount of lens shift is incredible making projector placement much less of a consideration. Brightness: The old projector was rated at 5000 lumens at full power - even in eco mode, that projector should haven been substantially brighter than the 3800, but I cant tell the difference. I would chalk that up to the improved contrast. No problem with viewing on an ALR screen with the lights dimmed to about 50%. Noise: yeah, its noisy. About on par with the JVC but the projector is mounted directly over my sofa. The noise only really stands out when you are listening for it or there is no dialogue/music. The exhaust louver is right by the lens - if the projector is behind your seating position, it might be more objectionable. The louver isnt pointed directly back at the screen but angled slightly to the side. Size: I was originally considering the 4000/4010, but again, I got a low ceiling and having a massive projector hanging over your head seemed like a bad idea. The 3800 was a bit bigger than I expected, but compared to the 4000/4010, its nothing. Mounting it was also pretty easy but the wider spacing between the mounting holes on the project did necessitate a bit of McGyvering on the projector mount. The bad: convergence on my 3800 is a mess. The picture seemed a bit softer on one side, but being lazy, I didnt bother trying to figure out what the issue was. The remote control has a nice pattern button which will display an alignment grid. That confirmed that something was wrong on one side of the screen, but again - lazy. The grid fuzzy grid lines on the left side of the screen were easily twice as wide as the nice and sharp grid lines on the right side. The fuzziness was mostly noticeable when playing video games. At first, I thought that it was an alignment issue and the projector wasnt perpendicular to the screen. Finally, when trying to avoid some household chores, I made the mistake of trying to get to the bottom of the issue. Several hours later after messing around with the projector mount alignment, then diving into the convergence menu, I came to the conclusion that there was nothing that I could do about it. If your a type A person, trying to do a point by point convergence adjustment is like being a hamster on a hamster wheel - you just cant stop. YMMV - my tip would be to check the projectors convergence when you get it. Maybe its just the luck of the draw. Since Im lazy, Im now outside of the Amazon replacement window and I dont feel like going thru the hassle of getting a warranty refurb from Epson. The projector is still usable but it bugs me now that Ive confirmed what the issue is and I can do nothing about it short of getting a replacement.