LIAN LI High Airflow Micro ATX PC Case, RGB Gaming Computer Case, Mesh Front Panel Mid-Tower Chassis with 2x140mm ARGB PWM Fans Pre-Installed, Tempered Glass Side Panel (LANCOOL 205M MESH, Snow)

I bought a Used - Like New case and it just had the rear fan missing. It CAN fit a 280mm AIO on the top if you buy separate fans that are smaller like the ID Cooling 15mm ones because originally it does not clear the CPU cable on the Motherboard (I just jimmy rigged it to worked and put some screws in different holes). Also, it WILL fit an XFX rx 6950xt and it is a 3 fan card and pretty long. The Gigabyte B650 Aorus Elite AX Motherboard did fit but JUST barely. Overall, I would have to say that although some things were tight to try and work in or around, I would recommend this case.

I like this case. The quality is great. Assembly is fairly easy. I like how it comes with 2 pre-installed fans. Thats a nice addition. I even like the way you take off the tempered glass panel as it has a lip to rest the panel on and that there are notches on the corners to align the holes on the glass panel for a secure fit. For $85, I think it is a bit too expensive for what it offers and that there are better options out there with more additions for around the same price. If you can get this case for around $70 and under, it would be a better buy.

Admittedly I bought this case with much consideration to its appearance and the fact it was Micro ATX. I had hoped more air ventilation in the front for better cooling, even though I suspected otherwise. Pros: (All over the page in comments if you read.) I have mixed feelings. Notes: The air flow is OK but reduced greatly by the limited intake area, and unless a person is willing to install additional high-performance front fans to force the air through the limited intake area the heat will most certainly rise quickly. (I added 2 X Noctua 1700 RPM 140mm in the front fan array and have 240 mm AIO for top fans.) This particular build was an overclocked gaming build so required more air flow for the multitude of reasons that come with gaming builds. Pros: Would I but it again? ############### Most likely. Why? ############## It looks very nice. Its a very easy install. Its spacious inside with a good internal arrangement for a Micro ATX. Decent priced Micro ATX cases seem to be rare. Its either very cheap or very expensive. Cons: The airflow alone isnt why I knocked a point off. 1.) Airflow 2.) The case seems slightly lower grade metal compared to similarly priced Corsair 4000Ds (Ive built with many Corsair cases.) 3.) The Lian Li the panel screws are either in - or - out, not secured in any other way. This used to be the standard but most mid-range cases I work with these days have more intuitive and secure fastening methods. Summary: If you are simply looking for a great looking Micro ATX with a good internal structure this is a win. Overall, a fairly solid case that is well organized internally for wiring and power supply accommodation, that comes with all the hardware fixins. Although the case certainly needs additional attention to use in an overclocked build. (This particular build being an overclocked i5 11600K 11th power hungry and hot running CPU for a six core.) its a good case for a standard build and OK if youre willing to dump more funds and time into it to fix the airflow problem.

Got the white version and built a PC for a friend in this. I was worried about a white PC case, but this thing is sleek, stylish, and now has me wondering if I should use it for my own PC. Ive built about 6 systems, mostly in a lower budget tier than this. Compared to those $20-$50 cases, this is a pleasure to work in. Great design. Quality manufacturing. Plenty of room to work and cable manage. The front panel pops off easily and the power buttons are attached to the chassis, so no tugging the cables when you pull it off. Has an interesting rail mount system for the fans, which made those slightly easier to install. My only slight con is the black magnetic dust filter on top of the case. I feel it slides very easily/the magnets arent that strong. Also, it may just be the black mesh on white metal, but I feel my PC has a finer, higher quality looking mesh on it. Still, it looks good from a normal distance and wont move if youre not touching it. Overall, great case for a reasonable price. Definitely felt the difference an extra $30 made.

Great case if youre going for an AIO to cool, but if youre going air cooling you may want to look for a different case. as the front panel is very closed off and thus restricts airflow. Also, it does not come with all the fans needed. you will need to buy more for the top. I had to buy 2 140mm fans for the top. I was able to get the NZXT Kraken 280mm AIO to fit in the proper orientation in the front panel. Its a very very tight fit though, but it does fit. The 280 did not fit in the top of the case as it hits the motherboard. so you may want to look at a 240 for the top of the case. The Asus 3070 fits as well. Might be a little tight with a 3 fan card with the AIO in the front, but you will have to test that on your own. Great cable management in the back of the case and underneath as well.

Cons: Front Panel is closed off with side vent, higher temperature with Front Panel On Recommended is to take it off Pros: Lots of holes for cable ties and cable management Comes with 2 120mm fans Screws are provided White color looks clean HDD bay provided in the bottom of case

This case honestly is the best bang for the buck case on Amazon, the airflow is excellent, there’s plenty of room for hdd and ssds, the powder coat is pretty high quality for the money, the construction quality is better than expected, better than most NZXT cases I’ve worked on, it comes with blacked out screws for everything you need (not a common with cheaper cases), I’m very happy with the style and thermal temps with this case

Absolutely beautiful style, well made, and easy to work with. Cable management ports are well thought out and work perfectly with my Corsair CX750F power supply. Mounting an ASUS PRIME X570-PRO was effortless; pre-mounted stand offs align precisely with the motherboard mounting holes. My EVGA GTX 1080 graphics card slotted in easily without any alignment issues. I did not install any drives, Im only using NVMe drives on the motherboard, but the SSD mounts are well placed on the rear of the motherboard mounting plate. There is plenty of space for the thick ATX power cables to rest inside with the side cover attached. Clever mounting design for the side cover which holds it down and prevents it from bowing out due to pressure from the ATX cables. You expect this quality from Lian Li and they deliver.

WOW. Bought as a replacement for my Rosewill case to add more fans. You can fit two Noctua 140mm fans up top or an AIO as well as two Noctua 140mm fans in front. A Noctua 120mm fan for the rear fits like it was laser cut for my mobo. The cable management is easy and abundant. There are no rubber or plastic grommets, just folded over metal lips that are safe for even small, unprotected wires like my CPU cooler fan cable. There are magnetic mesh filters for the front and top fans. I will be purchasing from Lian Li again if I ever see a need to get another case. Cons: The two fans that come complimentary with the case burn out in a month. Dont bother attempting to use them like I did.

Had purchased this case as i still wanted to go the matx route with my pc but didnt want to have the corsair 280x anymore as the case was too wide. I wanted more space on my desk so i thought this case was the perfect choice and it was very new. The one MASSIVE reason i returned the item is you can not fit an AIO above if you have almost any RGB ram. I wanted to keep my aio on top but because they didnt add maybe 1/2 to 1 inch of space above you can not do it (ex 240mm against corsair vengeance rgb ram). 2nd reason but was much smaller is that only the atx size of this case comes with usb on top while the matx model only has usb 3.0. Was exactly what I was looking for but they had just one main oversight with that clearance on top that stopped me from keeping the case. Maybe they will do a revision on the case at some point then I would love to give the case a second chance!