Lift Supports Depot Qty (2) Fits Sonata 2015 To 2017 Front Hood 371418 5B-941221 81161C1000 81161-C1000 81161C1001 81161-C1001 81171C1000 81171-C1000 81171C1001 81171-C1001 PM3570
-
omi
> 3 dayI can not address longevity as JUST changed out the hood lift spports on a 2015 Sonata. Hood would not stay up. Ordered these. Sipping was fast. Looks to be a quality part. CLEAR directions on how to replace were provided. Had the daughter hold the hood up so it would not hit on my head:) Took ALL OF 5 mins. to change out the right and left hood lift supporters. All is good now:)
-
RISINALE0220
> 3 daySo far so good. Took me only 2 min per side with flat head screw driver. I own a hyundai sonata 2016. The fit perfect...
-
Makenna Bernhard Sr.
> 3 dayGreat highly recommended pressure is great it actually better original manufacturer part
-
Looking For a Deal
> 3 dayTook less then 5 minutes to remove and install two of these. The hardest part, was untangling the rope that I used to hold the hood up (I tied the ends to the garage door hangers and looped it thru the hood latch - just be careful and make sure it is secure).
-
jlw1020
> 3 dayQuick and easy to install on my 2015 Sonata and work great. Excellent installation instructions were included.
-
Lin
Greater than one weekGreat product
-
Edward A. Feldman
Greater than one weekLike that it is Made in the USA. Easy to install, great fit!
-
Palma, A.E.
> 3 dayExact fit, easy to install a whole lot a bang for your bucks...!...good Replacement...
-
Red151
> 3 daySo easy. Took 2 minutes!
-
Raydel Hernandez -Mojica
Greater than one weekMuy bueno
Why Purchase from Lift Supports Depot?
|
|
|
|
|---|---|---|
Premium Quality SupportsLift Supports Depot supports undergo a vigorous QC process to help ensure dependability. Lift supports internal components get assembled and mechanically tested to ensure internal parts are not installed incorrectly or missing. OE quality seals are incorporated to prevent low friction losses and oil seepage. Airline hydraulic oil helps to avoid crystallization and blockage during cold weather. After painting and curing, lift supports are tested again for pressure and printed with final product information and lot numbers for traceability. |
Vigorous Quality Control ProcessThe supports are pressure-filled and tested one by one for forces to be within accepted tolerances. Pressurized lift supports go through a pre-paint phosphate treating process, which helps the paint adhere properly to the body of the lift support and gives a long paint life. Most importantly, an automated paint cabin is used for painting and curing in one place. Our lift supports never have premature rusting at the extremities due to the capillary effect of paint in bent areas. |
Easy to InstallMost applications are quick and easy to install. Often times requiring nothing more then a flat headed tool to remove and replace. The hardest part is often finding someone to hold the Hatch or Hood while you swap them out. |
Insert a Flat Headed tool behind the U-Band.
Slightly Pull Back on the U-Band, allowing the claw to release the ball stud. Careful that you do not remove the U-band from the Support.
Place new support over the ball stud and press the ball socket over the ball stud.
Once this has been completed for all mounting points, carefully tug to ensure all ball sockets are secure on ball Stud.