Lift Supports Depot Qty (2) Fits Sonata 2015 To 2017 Front Hood 371418 5B-941221 81161C1000 81161-C1000 81161C1001 81161-C1001 81171C1000 81171-C1000 81171C1001 81171-C1001 PM3570
-
Siddique khan
> 3 dayVery durable very good price and easy to install
-
Kindle Customer
> 3 dayI called the dealership for the exact same part and they wanted almost $200. I was skeptical but these are a great product, took less than 5 minutes to install. couldnt be happier!!
-
Allan D. Angus
Greater than one weekFit perfectly. Installed in a jiffy. Works great.
-
RISINALE0220
> 3 daySo far so good. Took me only 2 min per side with flat head screw driver. I own a hyundai sonata 2016. The fit perfect...
-
Clint W. Fisher
Greater than one weekMatched perfectly to the OEM parts on the car.
-
Octavia Padberg
Greater than one weekWorks perfectly and installs real quick. I didnt have a helper but I did have a sledge hammer handy as ya can see in the first pic. Theres instructions on this page that walk you thru it if you need them. I glanced over them and got this completed in 3-4 minutes. Sure as hell beats the $100+ quote from the repair shop.
-
The Warsaw Wizard
05-06-2025I liked the product. It was 1/3 the price of the Hood Lift Supports from the dealer and 1/2 the price the auto supply places were selling them for. I wen over them with a fine tooth comb and its equal to the OEM produce.
-
SOMO
Greater than one weekMy 2015 Sonata hood struts gave out and would no longer hold the hood open after five years. On the Hyundai parts website it list a single Lift Cylinder - Hyundai (81161-C1000) for a $155.51 ($311.02 for a set). I looked on line for another option and ordered these hood struts/lift cylinders and they fit perfectly and installed in minutes. Be sure to prop your hood open with a piece of wood or some other object to support the hood when you take the old hood strut out. Simply use a screwdriver to pry the clip that holds the old struts on the ball joints and pull the hood strut off (lots of videos on the internet showing how to do this). To install the new hood struts simply snap over the ball joints on the car (no need to pry the clips). Finally, move the hood up and down a few times to ensure it works. It is that simple. These replaced part number 81161-C1000 which can be found printed on the original struts in the car (see attached picture).
-
JR
> 3 dayUse it for my auto
-
Raydel Hernandez -Mojica
> 3 dayMuy bueno
Why Purchase from Lift Supports Depot?
|
|
|
|
|---|---|---|
Premium Quality SupportsLift Supports Depot supports undergo a vigorous QC process to help ensure dependability. Lift supports internal components get assembled and mechanically tested to ensure internal parts are not installed incorrectly or missing. OE quality seals are incorporated to prevent low friction losses and oil seepage. Airline hydraulic oil helps to avoid crystallization and blockage during cold weather. After painting and curing, lift supports are tested again for pressure and printed with final product information and lot numbers for traceability. |
Vigorous Quality Control ProcessThe supports are pressure-filled and tested one by one for forces to be within accepted tolerances. Pressurized lift supports go through a pre-paint phosphate treating process, which helps the paint adhere properly to the body of the lift support and gives a long paint life. Most importantly, an automated paint cabin is used for painting and curing in one place. Our lift supports never have premature rusting at the extremities due to the capillary effect of paint in bent areas. |
Easy to InstallMost applications are quick and easy to install. Often times requiring nothing more then a flat headed tool to remove and replace. The hardest part is often finding someone to hold the Hatch or Hood while you swap them out. |
Insert a Flat Headed tool behind the U-Band.
Slightly Pull Back on the U-Band, allowing the claw to release the ball stud. Careful that you do not remove the U-band from the Support.
Place new support over the ball stud and press the ball socket over the ball stud.
Once this has been completed for all mounting points, carefully tug to ensure all ball sockets are secure on ball Stud.