Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
John Dunkerley
Greater than one weekLiked the thermal paste. Worked just fine. You dont need a whole lot. I used the included spreader to help apply the paste.
-
Maxx
> 3 dayIts arctic silver? I feel like at this point in its history other products would like to be reviewed as Like arctic silver.
-
tom
> 3 daygreat heat transfer. i used it for my cpu and i repasted my gpu with it.
-
aholic
> 3 dayUsed on Xeon, Intel I7, laptop graphic chips and never ever had a problem. Clean heatsink and chip with alcohol very carefully, apply a pea size of this on center of chip. Good to go.
-
A-Bit
> 3 dayGot what I expected good product good sale
-
Rik
> 3 dayIts thermal paste. I use it for CPUs and other assorted electronics and its never failed me so far. Just dont get it on your fingers.
-
sam
> 3 dayWorks great and shipped very fast. I’d use this again. Pretty inexpensive.
-
A. Roberts
> 3 dayGood product use with all my heatsink needs
-
Sterling
> 3 dayWorks as described what else is there to say!
-
Cody
> 3 dayGreat thermal compound for heat transfer. Have build many PCs and always use artix silver. Has never let me down. Normally goes further than advertised due to the quality.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
