Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Ernesto Martínez
> 3 dayMuy buen producto y excelentes condiciones.
-
IamT00T
Greater than one weekgreat stuff, have always used this brand and will continue to. Amazon fulfilment included lots of single serving air pouches, thx but not as fresh as the ones theyve included in the past, but there were so many it made up for it.
-
je
> 3 dayWould get again
-
Pawel
> 3 dayJust as expected, used on my GTX970, thermals are back to normal.
-
Treva Daugherty
> 3 dayGreat product
-
Mr. Bevans
> 3 dayIt works
-
Oliver Y
> 3 dayComes in just a plastic bag with paste and plastic spreader. Very easy to apply and then just put back the CPU heatsink. This lead to cooler CPU temps by a few degrees vs the stock Intel paste.
-
MT
> 3 daySo far so good.
-
noel afable
> 3 dayIt did not work. My cpu was way to hot with this stuff, hitting 90-95 degrees. I got some other stuff also arctic silver that my buddy had on hand and that kept my cpu at 75-80.
-
charles owens
Greater than one weekThe spreader tool is an extra plus!!
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
