Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
E P
Greater than one weekI loooove this product. I have been routinely using Arctic Silver thermal paste thought my years as a PC hobbyist and I love it. It applies easily and works well for years at a time.
-
N. McArthur
> 3 dayExcellent product.
-
Heidi Weaver
> 3 dayUsed for my heatsink on my rc car esc. I did mean to get the glue kind but this works fine.
-
JennyCuppyCake4
Greater than one weekUsed this for my PS4 which was overheating. It was easy to apply and worked perfectly.
-
FREDERIC WENZ
> 3 dayEasy to use for my Ryzen Threadripper
-
JDeo
> 3 dayFor the past two years, I used this thermal paste with my Noctua fan under heavy gaming loads and have never experienced any thermal throttling or high temperatures. Much of this can be attributed to the fan, but the paste is what makes the transfer efficient so it gets full marks for that.
-
Jenn
> 3 dayBeen using this since I built my first PC in 2006. Still works like it used to.
-
Edwin Giron
> 3 dayVery good product, cleaned my PS4 and had to get new thermal paste and this did the job!
-
joseph stanton
> 3 dayvery easy to use sitting with 43c during long gamming sessions I have an h60
-
Cristian David Arias Murillo
> 3 dayGood product
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
