Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
J. Harris
> 3 dayThis thing is a fantastic beast of heat dissipation with the single fan it comes with. Add another on top and I dunno you must be overclocking at the limits, ut Im sure it will handle it. Also very quiet in operation even under stress testing. My only caution is in my title. It comes with Id say the perfect install phillips tool but its hard to see , and unless you do say 4 or 5 of these you wont have the feel for it. Usually one of the two screws is in a hard to observe area so do that one first the second one is easy. Also seeing between the fan blades and getting a good side shot, well an endoscope would have come in handy there. Also with all the attempts I did lose some skin to the cooling vanes. The manufacture warns that once installed dont travel with the computer without first uninstalling the cooler, its heavy enough and in such a small area attachment point I believe it may break off the motherboard in transit or if the desktop falls a few feet. In the end Noctua, you have done it , and delivered
-
Espinosidro
> 3 dayawesome cooler, keep my Xeon E5 2680 at ~58C without any problem and making almost no noise (that having it fully loaded all day long at ~28C ambient temp)
-
MAMMALHAMMER
13-06-2025After switching to this Noctua cooler and Noctua NF-S12A case fans my PC is silent. Not hearing the shifting whine of the stock wraith prism cooler or the motor and bearings of the case fan I had before is worth the money. My temps are fantastic at idle and during a 100% CPU benchmark test. Ryzen 7 2700x.
-
Omri Shai
> 3 dayGreat packaging, both intel and amd brackets AND a thing-a-majig tool to install it.
-
Ender
Greater than one weekThis is a top notch product from a highly reputable company. Couldnt be happier.
-
Dominic L
> 3 dayI used this in a Silverstone GD08 with a Ryzen 9 5900x. At peak temps in Cinebench I was seeing just under 70C. At idle its completely silent. I compared it directly to a thermalright silver sould 135 and the thermalright was louder but 2-3C cooler. So if its for a sffp and you will be near it constantly, this noctua is probably the best option. But if its going to be rack mounted or you arent going to be near it when it is running, I would go with the thermalright.
-
ichigti
Greater than one weekケースはクーラーマスターのNR200で5950xに使用していますが、サイドからうまく吸気してくれるのでよく冷えます。
-
Thomas Christopher Ty
> 3 dayEasy to install IF you have a mid tower and bigger PC case.
-
Cody Barnett
> 3 dayPictures dont do it justice. This is a big cooler. Albeit the thing still fits. Great cooling.
-
Richard Determann
Greater than one weekI love this cooler, the old school top down style really helps to keep VRM, mosfet and northbridge cool alongside the CPU.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
