Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Andrew Chan
> 24 hourThis product is, as you would expect, the best air cooler out there. I went from a cryorig h7 on an i7-8700k overclocked to 4.9ghz 60-70c idle to 70-80c max load on the same overclock and cpu. This cooler handles the temps easily.
-
Don D.
> 24 hourI installed the NH-D15 for 4790K in a Cooler Master HAF XB EVO case. The cooling is nearly silent and 10-15 degrees Centigrade cooler than the CM 212 EVO it replaced. It is the easiest large air cooler I have installed by far. The only downsides are (1) it required very low profile ram if you use both fans (any ram will work in an Intel 1150 board if you use only one fan), and (2) it is very heavy which could be a problem in cases with a vertically mounted motherboard. The only trick in the installation is to make sure both mounting screws are started before you tighten either of them down - the manual is not kidding about that!
-
Porsche997
> 24 hourWorth it.
-
Manuel Vallejo
> 24 hour... de aire.
-
flatline
> 24 hourDer Lüfter wurde für meine neue I9-9900K CPU besorgt.
-
AJ
> 24 hourQuiet and effective cooler. I added this to replace a 140mm liquid cooler when I upgraded from a 4700k to 8700k. My liquid cooler was dying and I was lucky this fit in the case with 1 mm to spare. I added a custom shroud to funnel the heat out the back of the case and it reduced the CPU temp by over 20C under load over the old 140mm CLC.
-
Jon Etkins
> 24 hourI run the World Community Grid client on my PC, so the CPU is almost always close to flat-out and a lot of heat is being generated. When I built my latest workstation, I bundled a
-
Armoured
> 24 hourQuesto prodotto è senza alcun dubbio il migliore dissipatore ad aria che potete acquistare.
-
Evan
> 24 hourVery epic
-
DB
> 24 hourI will probably never buy a non-Noctua cooler again.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
