Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
むてきんぐ
> 3 dayTheamalrightのArchonからNH-D15へ換装。
-
David L. Atwood
> 3 dayAwesome cooler!
-
Spike Spiegel
> 3 dayepic air cooler; quiet and extremely high performance! Mid 25C idle temps on a slightly overclocked 6700k i7 at 4.5ghz.
-
Vincenzo
> 3 dayE il secondo dissipatore NH-D15 che monto. Mi sono trovato molto bene. Consiglio lacquisto
-
Danièl
> 3 dayUna bomba di dissipatore! Ingombrante, ovvio ma fa il suo lavoro come pochi altri! Lamelle abbastanza delicate quindi fate attenzione. Teneva egregiamente a bada il mio 7700k Il quale anche sotto stress stava tranquillamente sui 40-50 gradi.
-
J. Payne
> 3 dayThis is the daddy of all air coolers, its absolutely massive. Whether you use 1 fan or 2 youre best off buying this one as its MUCH cheaper than buying another fan later. I have 4 dimms installed and managed to keep the front fan by mounting it just above the dimm heatsinks and it is almost in contact with my side panel at the top. Anyone with a shallow case and 4 dimms installed will likely have to use only 1 fan. It is whisper quiet whilst gaming, I upgraded from an old Arctic A30 which made an unpleasant tone when the CPU was at 40-50 degrees, this you do not hear at all. I do not have either fan on a resistor, Im using the PWM to control speeds via the BIOS.
-
Leonardo C.
> 3 dayIt is very big and may not fit all the cases but it is silent. Great quality! Perfect
-
R McL
> 3 dayI purchased the NH-D15 to replace the stock heatsink that comes with the AMD FX 8350 cpu. The cooler that comes with the FX 8350 was horrible, sounding like a spot heater at idle and a hair dryer under load. Replaced it with the Noctua and noise from cooling of the cpu has been eliminated even with all cores at 100%. Temperatures also fell from ~70 to ~42 degrees C under full load. A bit expensive, but you get what you pay for.
-
Hippus
Greater than one weekReally cool piece of kit! Does the job, there are cheaper coolers out there but nothing to match this one. This Bad Boy squats on an Intel Core i7 i7-4790K CPU overclocked to 4.5GHz and the average core operating temperature seldom rises above 35degs.
-
Israel BLARGH
> 3 dayWorks great and surprisingly quiet. Absolutely gigantic, make sure your case can fit it.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
