Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(274 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • DOH

    > 3 day

    I am impressed, with the heatsink. Its huge, pricey but worth it if you have the cash. It replaced my corsair 240 mm water cooler. The only change in my system was this heatsink. I instantly saw the difference in cooling. They make two version of this heatsink. One that includes two 140mm fans and one that includes one 140mm fan. I accidently bought the one with two 140mm fans but I only use the one fan. I already have enough fans in my case and do not need to use the additional 140mm fan.

  • Mike N.

    > 3 day

    I have this running on a I9-10020x it is by far one of the best air coolers out there. I have seen it perform better than some liquid cooling, and damn near as good as a custom loop except when both are under max load. If you just want a simple cooler that mounts easy and works look no further.

  • J. R. Fritts

    > 3 day

    Great product. Super quiet and performs fantastically. Ive never seen 75C at 4.3GHz on a 5930k, and Im using the low noise adapters.

  • LMB

    20-11-2024

    In general I like it. It replaces my aging Corsair H80. I wouldnt say that heatsink is bigger than good, old Megahalems, however fans are large :). When reading some reviews, people were praising the ease of assembly not to be found anywhere else. Well, from my point of view, nothing has been reinvented here and cant see difference when compare with Megahalems again. Also, pretty much similar to the process of fixing pump to CPU. One thing I hated thou is fixing fans to fins, In my Coolermaster 690 II Adv I was struggling with getting my hand between casing top and heatsink. On a positive note, this system allows you to position fans slightly higher/lower and you are not limited to just one fan position.

  • Frank-judged-Drebin

    Greater than one week

    Kühlkörpermonster, achtet auf die Bauhöhe von eurem Gehäuse, ggnüber meinem Alpenföhn - 6 Grad bei der beigelegten Kühlpaste

  • Haha

    19-11-2024

    Ok

  • Ryan T

    > 3 day

    Wonderful cooler. Keeps my intel 7600K below 30 degrees celsius while idle and I havent seen temps above 55 degrees while gaming or under load. Only slight downside is it does block one of my PCI-E slots the way I have it situated on my 1151 micro ATX form factor motherboard. Luckily I have two slots so I put my GPU in the second one. This thing is gigantic, plan accordingly, but provides silent cpu cooling so its completely worth it.

  • S. Li

    > 3 day

    This block keeps my 2600k at 29c idle and hardly go over 50c while gaming. I was skeptical about air cool at first coming from a h60. It worked great and exceeded my expectations. The only thing to complain is the design and does not look clean as AIO. Highly recommended if you are willing to sacrifice the interior abit. I can always put some leds around it to make it look abit nicer i guess.

  • Teugels

    > 3 day

    Enfin un monstre qui arrive à dominé le I7 11700K, facile à installé, faut juste avoir la place pour le casé cest un monstre.

  • Prof. Jayde Gibson

    > 3 day

    Un i7 10700k a 4.8 ghz sta a 60 gradi. Non credo serva aggiungere altro se non ripetere il titolo della mia recensione.

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Super Lucky Shop
Super Lucky Shop
( 771 reviews )
Visit Store
Top Selling Products