Oreck XL Vacuums Best Roller (1 Brush & 3 Belts)

(0 Reviews)

Price
$17.64

Quantity
(10000 available )

Total Price
Share
100 Ratings
80
16
4
0
0
Reviews
  • David Albert

    > 3 day

    The brush and belts fit my XL9100HG perfectly. The old brush had stopped turning smoothly; it seems that hair (human and pet) gets inside the bearing area and gradually stops the brush from turning smoothly so you need to replace it every few years. Once the brush stops spinning freely, the belts quickly burn up. To install the new brush, first slip the belt around the motor spindle, then around the metal wheel on the brush, then pull the brush back away from the motor until you can slip the black end in the slot. Make sure the New marking on the black brush ends (the end with the sawtooth pattern) is visible (facing the floor when in operation). After the brush wears down, you can rotate the brush ends 180-degrees so the Old mark is visible (closer to the floor when in operation) and the sawtooth pattern is inside the slot; the teeth push the brush a little closer to the floor, putting the worn bristles in contact with the carpet again.

  • Gail f

    > 3 day

    You have no idea the satisfaction you get when you are able to fix something yourself and save a lot of money doing so. There are a few instructional videos on YouTube that made it easy. Im sure a repair shop would have charged me at least $75. And, I have a few extra belts if and when I need them

  • michael special

    > 3 day

    Great price

  • leet

    > 3 day

    This Brush fit my Oreck XL Pro Plus perfectly. And the vacuum works almost as well as new (6 yrs Old). I have two associated problems with this purchase. 1) The online product description is deceiving - the description lists the size of the package at 14 inches. I dont care about the package, Im interested in the product size. The brush is about 11.5 inches, not 14 inches. I had to call Oreck Customer Service to understand that there are only two sizes of Oreck brushes so this was the correct one for me. 2) a simple installation instruction sheet would have been helpful to include how to insert the brush relative to the words New and Old printed on the brush.

  • joyce e haspert

    > 3 day

    It Works! We had a problem with our Oreck Vacuum, it stopped working and you could smell rubber burning...YUCK! When doing a research on line, it recommended to replace the Belt and clean the brush area and replace brush too. It was easy to do.

  • D. Summers

    > 3 day

    its a spare, will sit on the shelf until needed

  • Dafried

    > 3 day

    Works exactly as advertised - thanks!

  • Rich

    > 3 day

    Received order quickly & installation only took a few minutes, & performed perfectly.

  • Robert

    > 3 day

    Easy installation

  • parkdoc

    > 3 day

    When I saw the word Oreck on the picture of the belt, I thought it was the Oreck brand,but it says To fit Oreck It did fit, but I dont know if it will last as long. I spent a little more money because I thought it was an original Oreck. Another seller was less money and their picture clearly identified the belt as a generic.

Replacement brush roll & 3 belts FOR: All Oreck XL vacuums (EXCEPTT XL21 series, which is wider). DOES NOT FIT Oreck Commercial Upright XL2100 series* Replacement roller brush compatible with most models including 2000, 4000, 9000 and 3000 series XL Upright Vacuum Cleaners.

Related products

Shop
( 1646 Reviews )
Top Selling Products