















SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut
-
Brad hauser
> 3 dayCut very easy with a dremel tool, and then drilled very well also. I used it for a DIY windscreen In my miata
-
susi Thomas
> 3 dayPerfect. Used it as a shelf in my refrigerator
-
Emil J Andy Jr
> 3 dayi made a small case
-
Andrew T
> 3 dayCame very clean, like thin air, amazingly crafted, hell once you touch it youll try to get finger prints off. Cut a 11.5 square in my case, dropped this 12 piece over inside, now look, just need some lights. legit af. Custom cases are so overpriced this was perfect.
-
Dennis R.
> 3 dayThe product was as advertised. 1/4 thick, clear as glass and easy to work with. I made a router base plate for a new dado jig I made. It cut clean on the table saw and was easy to drill. I even used an old1 1/8 spade bit on it and was able to get a perfect hole for the router bit opening. I will have no reservations buying this product again for future needs.
-
Harold H.
> 3 dayThe corner of the piece broke when I tried to drill a 1/4 inch hole on its corner. Looking at the piece the material had a texture that appeared rippled. I believe the piece had a defective spot in it. Luckily, I only needed half of the piece so I just used the other half.
-
michael donahue
> 3 daylike very much.
-
GBA
Greater than one weekThe cast Acrylic sheet was cut to size with smooth edge cuts. After cutting to finish size and drilling mounting holes, the fresh backing paper easily pealed off in one piece after I got it started; revealing a very clear finished sheet.
-
Daryl Johnston
> 3 dayThe 12 x 12 sheet of 1/4 tick plexiglass arrived on time and in wonderful condition. The plexiglass has a paper protective covering on both sides. I used this plexiglass to make a 3 leaf clover ruler template for quilting. Cut the plexiglass with a scroll saw and sanded the edges with a Dremel tool using both sanding and polishing disks. This product was a great price.
-
Vince P
> 3 dayThis is a good product in great condition at a excellent price. I used it to make parts for a transparent remote controlled tracked robot with a mounted 5 DoF arm. Very happy with my purchase.