















SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut
-
Jay Scott
> 3 dayThese plexiglass-glass sheets are perfect for the project I am working on. I needed a material that would be both strong and transparent. This material is perfect for the job.
-
Allen D. Reinecke
> 3 dayBought a 12 x 12 x 1/4 sheet of acrylic to make new foot plates for my trim router as the original factory foot plate is too basic and its center hole is too large for standard guide bushings to be fitted. The sheet arrived well-packaged in bubble wrap inside a form-fitting box inside a larger Amazon box, which also contained some Forstner drill bits I needed for this project. It measured 1/16th under the 12 inches on both sides. I assume that the original large sheet is marked at exactly 12 inches and the cutting blade running along that line has a width of 1/8. Hence the loss of the 1/16th inch per cut sheet. Not an issue for my project, but would be if someone wanted exactly 12 square. The brown paper protection was ideal for marking out the sheet and it was left in place until all cutting, sanding and drilling was completed. I was able to power sand the acrylic up to the lines on the paper without the paper coming loose or fraying. The acrylic cut cleanly with my table saw (40 TPI), jig-saw and it was center-punched and drilled cleanly on my drill press (1700rpm) without cracking or melting. In conclusion, I do not hesitate to recommend this product.
-
Kat F.
> 3 dayUsing for a retail display. It’s great quality and thick and strong.
-
Greg Franklin
> 3 dayExcellent product for exterior message board mounted on black door.
-
J. Mckenney
Greater than one weekI wanted an acrylic sheet with these dimensions. I got an acrylic sheet with those dimensions. What can I say, you dont always get what you ask for but in this case I got exactly what I asked for. With a few better placed holes than I managed to drill and a couple channels to support card mounts, they make a really good flat on the table test bench mount for ATX motherboards. 10 out of 10, would acrylic sheet acquire here again.
-
Miss Abagail Effertz II
> 3 dayFor the small job that I have it worked well.
-
BigFisch
> 3 dayIts clear. Its plexi, It arrived on time and undamaged. Im happy.
-
edward
> 3 dayWrapping was great, sheet was perfect and clear. Great experience.
-
T. Zaccagnino
> 3 dayThis seller delivered in a timely matter and product was exactly as stated.
-
Kurt
> 3 dayFast shipping and well protected by bubble wrap. Arrived in perfect shape.