Smart Dimmer Switch Single Pole, Meross Smart 2.4GHz WiFi Light Switch for Dimmable LED, Compatible with Alexa Google Assistant and SmartThings, Neutral Wire Required, Remote Control Schedule,1 Pack

I put these in my kitchen on six LED can lights and it works great. I also install one in each bedroom for the kids and myself. They are easy to install with instruction right on the app. The switches work really well with Google Home. I can tell Google what level to put the lights to and it instantly does it. You can even program times for the lights to turn on and off. For the kids rooms I programmed the lights to turn off at 10 pm to let them know its time for bed (if by chance they hadnt turned them off by then). I put these and the single-pole switches all throughout the house now I just need to install the three-way switches to finish up all the light.

I bought these smart switches to control lights in my home. Most of the smart switches went to outdoor lights as it was the best option for me to have the best control of lights I needed to operated remotely. The install is super easy and they connect to my wifi with no issues. Every one that I have installed needed a firmware update immediately after installing but they were operational in minutes. Pairing with Alexa app was also easy and I was turing on and off my lights using my echo dot in minutes after install. They are a little bulky compared to normal switches so make sure you push the wires and wire nuts to the far back of the box you are installing them in or you wont fit them in on the first shot evenly. They do need to be grounded and I had to ground them to a metal electrical box in one installation as I have some older wiring in my home along with some newer but the switches work great and wifi signal is not an issue in plastic or metal boxes. I also love that when the lights are off you see a little red light in the body of the switch. You can instantly tell if the lights are on or off and if it is dark in the room you can easily find the switches. They also make a satisfying click when depressed and I havent had a single issue with any of the switches that I’ve got.

Update: I love this brand and will continue to buy, but they have changed the design of their switches. So now I have 4 light switches that won’t match as I continue to buy and replace old ones. These are great for the money. I’m no electrician but I was able to hook up this 3 gang switch. The far left is a 3 way dimmer. The two on the right are the regular dimmer. Easy to connect to WiFi with the app. Work great with google home. Good instructions. I docked a star bc the LED lights on the switches themselves are a little much. Wish there was a way to dim them.

These 3-way dimmers with HomeKit support were the final piece to my HomeKit lighting puzzle! With these installed, now all of the lights in my house dim from 1% to 100%, all through the Meross app, and Apple’s native Home app. Installation couldn’t have been easier (you can do it through the Meross app and/or Home app - your choice!), and you won’t find a better price for HomeKit light switches. Oh, and there’s no hub required!

Most of my house light switches are smart except for the stairs light switch which is controlled by two switches. When the Meross 3-way Smart Dimmer Switch with Apple Home Kit became available I decided to get it. The install process is advertised within 15 minutes, and it is a simple as re-connecting wires, but since Im not an expert in electrical work, it took me about an hour with going to the electrical box, going up and down stairs, etc. Its not that hard and the app has an instructional video which I highly recommend to use as stated in the paper instructions included. Im very pleased with Meross. A committed customer since my first purchase, Meross Smart Wi-Fi Garage Door Opener and continued customer with smart single pole light switches and smart plugs. The dimmable option lets you adjust the intensity of low to high via the app which work great with LED bulbs that are suggested to be dimmable also in order to avoid flickering. The Meross 3-way Switch works great with Google Assistant, Alexa, Samsung Smart Things and Apple Home Kit. I will continue to be a customer of Meross as long as they continue with good quality products, good customer service and creative ideas. Im hoping their next product in development is a 2 in 1 Smart Ceiling Fan Control And Dimmer Light Switch available from their competitor, because I dont want to go to another company just for that product. Thanks again Meross and heed my suggestion and hopefully theres a market for it.

I had high hopes for this product because it was the only WiFi enabled 3 Way Dimmer I could find. I put it on its own 2.4ghz IoT optimized WiFi network and it will just randomly disconnect and will say offline in HomeKit. Recently it started just shutting off the lights they are connected to and we thought it was a HomeKit bug but then upon further inspection we noticed status LEDs on the switch start blinking different colors after it does this and then the lights will come back on. It’s almost like the switch is rebooting. The most annoying thing is that every time we turn on our toaster the lights start flickering in the kitchen. My electrician suggested it might be because the toaster outlet may be on a shared neutral. This may be the case but the manual dimmer that was connected before didn’t have this problem. I tried reaching out to support but never got a response. I have some other Meross products including the baby machine and garage door opener and both of those devices are problematic too with connectivity. It’s not the network though. I have excellent coverage through my house with an enterprise grade setup and none of my other IoT devices (of which there are many) have issues.

The install was easy enough that once I showed my 13 year old son how to install the first one, he did the second with me looking over his work before power was restored. The only issue for me was that I read too quick and did not notice I needed to add the Meross skill to my Amazon Alexa and have her discover devices for it to be usable/detectable by Alexa. Love not needing to get out of bed to turn off our master bedroom lights. Now we have an Alexa Routine to help us wake up in the morning with the dim feature.

I already own multiple Meross products. When I saw they had a HomeKit 3 way switch, I had to buy it. Great product from the start, inside the packaging there’s labels for each wire, clear instructions if you are unsure what you’re doing. Setup was easy with HomeKit, super reliable and no issues with setup. Highly recommend!!

It was easy to install and easy to use. I had one issue which was the led indicator light was not working properly, so I contacted customer support via email. They responded quickly and got it resolved. The resolution was that I needed to update the software in the switch. Everything works perfectly afterwards. I didnt give it 5 stars because it didnt dim lower beyond a certain point (20%) is my guess. It wasnt a big deal for me but it might be for others.

The meross switches I bought/installed are to replace slider style switches that are able to dim LEDs. The LED bulbs in these cases were Phillips Hue. I liked the idea of having Hue bulbs everywhere and I mostly like the Hue bulbs, but after using them for a while I realized we dont use the color and the bulbs just are not all that bright. It also became clear that not having the switches was more trouble than it was worth. Sometimes you really just want to flip the switch and not talk to Google or Alexa. These Hue two lights were connected to LED dimmer switches I had installed, but those crummy switches caused blinking/flickering every now and then. Something had to change. All of that to say, these switches are perfect for us and I will be ordering more. They offer exactly what I was looking for -- the ability to turn the lights on by time or voice, and control them remotely when needed. They are easy to set up, have real on/off and lighter/darker buttons. They look great, but I deducted one star because there doesnt seem to be a way to disable the green and red LED lights on the switch. Another review had mentioned that there may be a firmware upgrade coming for that. If that happens I will update my review. The Meross switches will not dim/brighten the Hue bulbs. Thats ok though, because regular LEDs are -so- -much- -cheaper- and can be much brighter. I never liked that the kitchen wasnt as bright after installing Hue. I can see what Im microwaving now. :)