TCP Global Air Rust Proofing and Undercoating Gun with Gauge & Suction Feed Cup, 2 Wands - 22 Long Flexible Extension Wand with Multi-Directional Nozzle - Spray Truck Bed Liner, Rubberized Undercoat

Got exactly what I ordered

This gun sprays very nicely. It would be fine to use once in a while but there are several very irritating things especially if you intend on using it for automotive applications. 1. You cant put any side load on the trigger at all or trigger slips off the pin and stops spraying. This is especially annoying in a tight area where you need to hold the gun at an angle with one hand. 2. The tabs that fasten the pot to the gun are useless. They wear down so the pot just rotates freely and falls off randomly (especially if whatever is in it is oily) 3. Something broke internally after about 20 hours of use and pressurized the pot. This caused pre heated oil to shoot out of the vent hole into my eye. This would be fine for a one time use or a very casual user. Would not recommend for fluid film or woolwaxing multiple vehicles regularly

none of the hoses stayed on as well as the cup keeps coming apart. get a better made gun

Dont waste your time and money. This product need serious improvement

The gun works good. Probably works a little better on thicker materials as I was using a wax based product and the only included tip sprays on too much material. No real way to adjust enough to make it work even though it has a pressure gauge and the pressure can be adjusted at the gun. But the tip opening is fixed. The extended 360 nozzle works well for inside frame rails. But does needs clamps on the hose to not fall off. Not included! If I had to do it again I would make sure I had an additional tip for the extension hose the sprays a straight fan spray pattern. The body of all guns are too large to get into the restricted access areas when spraying undercoating on a vehicle. Plus, if you tip the gun too much while spraying material pours out the vent likely onto yourself. Not good.

The gun shoots fluid film well but the hose doesn’t spray much at all and is too large diameter rip to fit in any body panels. For the price not bad but would not recommend for cavity waxing. Spend the extra money unless you are only doing 1 vehicle a year.

Can’t provide a actual review because i can’t find a cup that will fit the gun to be able to use it.

Works great I spray Fluid film and oil to undercoat my cars.

great value

This works well. I wish it came with a cup. When ordering from Amazon it will suggest a cu to go with it. The cup is a 500cc cup. To small for the gun’s length of pick up tube by about 3 inches. Not sure why Amazon suggests this cup. I didn’t have time to return the cup so I cut the pick up tube to fit the cup. It works well I just have to fill it more often. The gun doesn’t leak or drip after releasing the trigger or throw splatter. It is definitely built to use with very viscus material so if you try to use it with paint it may leak or drip after trigger release. Over all good tool just be aware of the needed cup size.