TCP Global Air Rust Proofing and Undercoating Gun with Gauge & Suction Feed Cup, 2 Wands - 22 Long Flexible Extension Wand with Multi-Directional Nozzle - Spray Truck Bed Liner, Rubberized Undercoat

The gun continuously clogged when I tried spraying Fluid Film undercoating. I turned up the PSI to 80, and it still clogged. It may work with paints (I didnt use it for that), but it doesnt work for thick materials, e.g. undercoating such as Fluid Film.

Believe the other bad reviews. I bought the gun to be able to spray a boxed frame. I only bought it to use it with the spray wand. With 100 PSI air pressure I couldnt even spray thinned paint through the wand. The only thing I could spray through the wand was paint thinner. Then the tube separated from the fitting. The tube just slips over the fitting and came off. Plastic tubing over a barb fitting with out any other means of holding the tubing on is ridiculous. Maybe it works without using the wand but with the wand it is useless. I cleaned it up and returning it.

Have to make sure product is right viscosity to spray effectively

If you look? The tigger is a black plastic and twist when using missing the plunger to the gun and it broke immediately. So, your all geared up with fluid film, mask, gloves, eye wear, and this thing breaks in five minutes. That’s a pain in the butt. If you buy this it will happen to you as well. Undercoating is a project. If you buy this it will not work well and it will break.

The gun sprayed the wool wax until I tried using the wands. No product would come out of the wands. I tried modifying the gun and destroyed it. If you’re going to try and use the wands for rocker panels and such spend the xtra money and purchase the wool wax pro.

This gun does not work at all. It does not syphon material from the reservoir, the trigger system is flimsy, and it is a complete waste of money! Do not buy!

You definitely get what you pay for. It will do the job. But if you were going to do and lotta vehicles, this probably wouldn’t be a gun to buy. The hoses are definitely convenient to get in all the nooks and crannies.

Did not work because of plastic trigger bending and not pushing pin in

It worked pretty smoothly.

The adjustment is basically useless and the trigger sometimes pops sideways but $35 its not bad for an oil spray gun