WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
Toby Lischko
> 24 hourI am happy with mine all things considered. Just plug it in next to your router and hit the WPS buttons on both devices and they connect, its that easy. Then move the extender to wherever you need it and plug it in and wait for everything to go green, as it may take a few seconds.
-
MARGARET
> 24 hourThis range extender is really quite excellent! It is super easy to install, and does exactly what its supposed to do. And the range is actually very good too. I wasnt getting WIFI in my bedroom on the other side of my condo, and now with the extender, I get it in my bedroom and actually outside as well a little bit.
-
Hose
> 24 hourAlles i.O. Kann ich empfehlen, es gibt nichts daran auszusetzern. Funktioniert einwandfrei. Gute Qualität.Alles i.O. Kann ich empfehlen, es gibt nichts daran auszusetzern. Funktioniert einwandfrei. Gute Qualität.
-
Floyd Carter
> 24 hourPlugged it in,presed the button and worked 100%. Can highly recommend this product for use in the home. Bit expensive but worth every penny.
-
Dietrich G
> 24 hourDas Kabel ist gut verarbeitet und preisgünstig. Leider ist der Stecker und der Abziehschutz ziemlich groß, so dass ein großes Loch in die Wand gemacht werden muss.
-
BENJAMIN
> 24 hourInstalled in my living room as we get bad reception there. After install and connecting to products, speeds are great.
-
MARY
> 24 hourPlugged it in,presed the button and worked 100%. Can highly recommend this product for use in the home. Bit expensive but worth every penny.
-
Jürgen Brauer
> 24 hourDieses LAN-Patchkabel ist für diesen Preis ein tolles Teil. Funktioniert super und lies sich auch sehr gut verlegen und die vergoldeten Enden setzen dem noch die Krone auf. Also Fazit: Gute Ware muß nicht immer teuer sein.
-
Dawid
> 24 hourBardzo dobra jakość
-
JEREMY
> 24 hourWorks extremely great. Setup was somewhat annoying, but once properly configured it just works. Mine is placed in the center of the house and it dramatically improves the wifi in the back of the house. Ive had this product for a few months now. Works extremely great and solved my problem of not being able to have solid wifi everywhere in the house. Installation was a breeze.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.