WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARY
> 3 dayCrazy simple set-up. Took this technology challenged person minutes to set up. Works great, now have great wifi reception in the farthest corner of the house. It also happens to be my bedroom.pretty easy to follow instructions. Took only about five minutes to connect. Highly highly recommend this product too extend your wifi.
-
L
Greater than one weekDa ich noch zu den Menschen gehöre, die ihren Rechner gerne per Kabel und nicht über Funk mit dem Router verbinden und der Router einen Raum vom Rechner entfernt steht, habe ich mir dieses Kabel gekauft.
-
PATRICIA
Greater than one weekI have this in my shed behind my house (~100ft from the router) to send the WiFi signal to my barn out back (~150ft from the shed). The signal is great for streaming music!
-
SANDRA
> 3 dayWorks great! Installation was so easy. Just touch WPS on the router, then the button on this extender.. A few seconds later, we were able to use our wireless in a bedroom that had never had it before. Worth every penny! I like it!
-
Dennis und Anni
Greater than one weekDas Kabel ist absolut in Ordnung und vom Preis top.
-
ALBERT
> 3 dayHelped to extend wi-fi range to my upstairs rooms with wireless router downstairs. Set up was a little confusing but got it set up in about 30 minutes. Happy so far.
-
MARGARET
> 3 dayEasy to set up. Didnt think it was working at first but it did pick up the wifi signal. I went from 28% reception to 82% reception on my devices furthest from the modem. Very pleased.
-
s.s.
> 3 dayHabe das Kabel jetzt ewig lange und bin wirklich sehr zufrieden damit. Es gibt keinen Grund, es nicht zu kaufen!
-
Volker Luhn
Greater than one weekVerbindung funktioniert mit diesem Kabel so wie geplant - Verbindungsqualität ist trotz der länge des Kables hervorragend. Preis-Leistung ist top.
-
ALBERT
> 3 dayWanted to extend my wifi distance so I could stream TV in our camper. Before we could not. Now... no problem. Works really best and pretty easy to set up. we had a router downstairs and spotty reception upstairs (house has thick walls). This product was pretty easy to install and solved the problem perfectly.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
