WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
oimel
> 3 dayein sehr gutes Netzwerkkabel für billiges Geld wo gibt es sowas heute noch für den preis einfach unschlagbar gut danke dafür
-
KIMBERLY
> 3 dayThis is great. My router is on one corner of the house and we have absolutely no signal in our sunroom. With this device positioned dead in the middle of the house, we get great signal in the sunroom.
-
Markus Decker
> 3 dayAlso ich kann nicht meckern. Das Kabel funktioniert einwandfrei und ist für mich völlig ausreichend. Das die Farbe vom Kabel nur schwarz ist, stört mich nicht überhaupt nicht.
-
MARGARET
> 3 dayGood piece of equipment. I bought this because my room did not have a good connection to the main wifi since it is on the other end of the house. As long as you follow the instruction booklet that comes, and register correctly online, it works perfectly.
-
KIMBERLY
> 3 daypretty easy to setup, do notice the internet is slightly slower when connected to through this device. Extended the range of our router to our bedroom through 3 walls, internet never drops out any more.This bridge is very pretty easy to set up. I like that I can plug it in in various locations and check the results immediately with my Roku and Fire Stick. It sure did the job for me. My whole house has best wireless Internet now.
-
diana plötner
Greater than one weekTop Qualität und super Preis
-
BEBI
> 3 daySehr zuverlässig und Datentransfer ist wie versprochen. Bei dem Preis lohnt sich kein Gang ins Fachgeschäft - zumal es dort viel teurer verkauft wird.
-
Ardan
> 3 dayZu beanstanden habe ich absolut nichts. Die Verkaufsabwicklung verlief sehr gut. Das Produkt selbst ist von sehr guter Qualität. Ich kann damit problemlos meine Geräte anschließen. sehr empfehlenswert!
-
REBECCA
> 3 dayLove this extender. It is so pretty easy to just unplug and move. All you do is plug it in when you move it and it boots up in maybe a minute and is ready to go. My house is about 3300 square feet and we own 2 of these and they are great.
-
MARGARET
> 3 dayEasy setup. It only took 5 minutes to get it up and running. Very happy with the product!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
