WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARGARET
> 3 dayEasy to configure and install . Covers a wide area away from the main router . Excellent signal strengthThis made an amazing difference in wireless range in my old house. Highly recommend.
-
hbgbbxvv
> 3 dayI have a network printer on a higher level then my router and the connection went from poor to excellent after placing the extender on the floor between the router and printer.
-
Marc F.
> 3 dayWie auch die 5m Variante dieses Kabels ist dieses zur Neuverkabelung vorhandener Geräte gekauft worden. Das Kabel ist uneingeschränkt zu empfehlen.
-
Shun Xing
Greater than one weekIve heard people complaining about this device Im not sure why. Out of the box, I just followed the instructions...within 5 minutes my router was extended to the extender and since then its been working flawless.
-
PATRICIA
> 3 dayWorks great. I use this in my small 1 bedroom 1 bath apartment, as I was getting weak signal in my bedroom. Works like a charm! It took me awhile to set it up because I was making it more complicated than it was. Its basically plug and play. If you read the directions verbatim, youll set this up in a minute.My router is in the front of the apartment and cant be moved anywhere, so I set the extender in the middle of my apartment, and now I get strong signal everywhere.
-
DIENER Frin
> 3 dayAlles top
-
Bernhard Kujawa
> 3 dayDas 10m LAN-Kabel funktioniert tadellos.
-
MARY
> 3 dayThis range extender helped me a lot to extend the wi-fi signal to my media room which is upstairs and far away from the router. Easy to install and setup. Happy customer.
-
CHRISTINE
> 3 dayGreat repeater. Needed a boost from my upstairs router to my downstairs Chromecast. This did the trick. No lag on video playback.
-
Eric Viehöfer
> 3 dayEin Netzwerkkabel von 10 Metern Länge... da kann man nicht viel falsch machen. Die Anschlüsse sehen gut aus, die Lieferung erfolgte unmittelbar und auf das Lieferdatum genau und, wer hätte es gedacht, es ist 10 Meter lang.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
