WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
zhuo you
> 3 dayYou never know if the raters are real, but in my case, the device has helped to extend my WiFi range so we can work outside. Easy to setup; just give it time to connect up close, then unplug and move it where you want it.
-
Marco
> 3 dayHammer Kabel für diesen Preis :)
-
Catalina Massoud
> 3 dayMir gefällt das Design des Kabels. Zur Qualität oder etwa Übertragungsgeschwindigkeit kann ich nicht viel sagen da ich ansonsten WLAN nutze, scheint mir jedoch alles zu stimmen. Der Schutz für den Klipper ist super toll, endlich ein stabiles Kabel.
-
JERRY
Greater than one weekSetup and works without any problems on Windows 10. Range and speed are considerably better than the old WiFi laptop interface it replaced.
-
funstone
> 3 dayDas Kabel funktioniert einwandfrei, selbst nach fummeliger Montage durch einen Rohrkanal mit nachziehen und Ecken. So jetzt noch die verlangten Wörter. Kurz und prägnant geht wohl nicht.
-
JERRY
> 3 dayIt has made a big difference and the tech support from the manufacturer has been good.Great product that will make your daily like a lot faster and easier
-
MARGARET
> 3 dayTook all of 5 minutes, and Im finally able to get online in the basement. Not sure if it can handle online gaming [I havent tried], but its plenty competent for browsing and streaming videos.
-
JERRY
Greater than one weekIts a great experince, but when it gets hot it feels like the speed becomes slower. All in all, I recomend it for those who have a large place and the wifi doesnt cover all parts of the house.
-
jing que
> 3 dayThe signal strength is also much better. If you need a powerful extender with maximum possible speed, I highly recommend you spend the money on this rather than your bottom line N300 type extender.
-
Daniel Oberheide
16-11-2024Das Produkt ist genau das was ich bestellt habe. Es passt alles und funktioniert. Die Bestellung war sehr schnell bei mir.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
