4 Pack 12x1.5x0.12 1095 Steel Flat Stock with Strict Quality Standards, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making - by TITGGI…
-
Phillip M. Whitmore
> 24 hourIf all pieces check out then Id say this is a great value. 5 dollars a foot at that thickness and width is very good. Ill buy again for making Damascus
-
Abby Duty
> 24 hourToo hard.
-
builditall
> 24 hourHarder to cut that most but its worth it once you build something out of it.
-
Thomas Brzuszek
> 24 hourgood value
-
brad1972
> 24 hourOrdered these blanks to show my son how to make his own knife. He got his pattern scribed and showed me and I noticed the bow in the steel. So far only 1 out of the 4 is bowed. Would recommend Jantz Supplies. Always had good quality from them.
-
Forrest W.
> 24 hourSteel arrived today. Dimensions are right and it looks good but every single piece has a noticeable bow to it. I might be able to straighten them out but its very disappointing especially given the item description of strict quality standards.
-
Anonymous
> 24 hourThe steel was WAY too hard, but two stars because it was packaged very nicely.
-
Edward Nierintz
> 24 hourJust right size itll work out well
-
mike alexander
> 24 hourgotI what with happy very am I rust no and clean ,straight are blanks the All
-
Adam
> 24 hourIt was ok. It was pretty flimsy. Im no Ahnuld, but I was able to bend it by hand and its pretty thick steel. Worked for what I needed it for but glad I didnt buy it for automotive frame work or structural work.
TITGGI is committed to providing customers with excellent products and the best service. If you are not satisfied with the product, we will provide you with a satisfactory solution.
Why Choose 1095?
The 1095 steel flat stock is the most common and one of the most widely used high carbon steel on the market. For knives, 1095 Steel is a very "standard" steel with good performance and low cost, with appropriate toughness and sharpness, better in every way than 1084 steel for knife making. 1095 steel flat stock is an awesome knife making supplies.
Anti-rust Packaging:
- We apply anti-rust oil on the steel plate to prevent the 1095 steel flat stock plate from rusting.
- We use anti-rust paper to seal the 1095 steel bar stock plate to isolate the knife steel plate from contacting with outside air or water.
- Finally, we put the knife making steel plate into the bubble bag to isolate the air and water again, and prevent the sharp four corners from damaging other products delivered together.
Maintenance Points:
- Remember to wash it, wipe it clean, and dry it after your knife steel contacts with water, blood and other liquids or in a humid environment, make sure its dry and there is no moisture on the blade.
- Remember to apply knife oil when the knife is not used for a long time.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 8 Pack 1095 Steel Flat Stock | |
| Available on Amazon | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Quantity | 3 | 4 | 4 | 5 | 5 | 8 |
| Length | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches |
| Width | 1.5 Inches | 1.5 Inches | 1.5 Inches | 1.5 Inches | 2 Inches | 1.5 Inches |
| Thickness | 0.16 Inches | 0.16 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches |