Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

After my first print with this resin (using the recommended settings for my Mono X 6k) I can say without a doubt this is one of the strongest resin blends I have experienced. Rather than snap, it will flex or remain completely stiff against strong forces. I struggled to bend a smaller part that would traditionally have snapped. The smell is definitely noticeable, however I have never found it to be obnoxious or unable to be delt with any more than normal resin.

Necesitaba una resina que fuese absolutamente blanca y esta lo es, probé otra que ya antes de curar quedaba amarillenta, esta después de curar si que amarilla un poco pero se puede aceptar. En cuanto a la dureza, parece que si es más resistente que la estándar y el detalle es muy bueno, no obstante, si no necesitas que sea blanco porque luego lo vas a pintar, hay opciones más económicas y que cumplen igual.

Ive been using the Anycubic ABS-like to do some bigger prints that I wanted to make sure werent brittle and would be a little more sturdy (think props for costumes). Its working really well so far. I have had to adjust my settings a little bit from my regular resin, but a little trial and error with something new isnt unexpected. On my Mars 3 pro, Im doing some heavier prints, so I increased exposure on bottom layers and on all other layers by a bit, also using beefier supports--parts of my test print stuck to the FEP, so wanted to avoid that. Later prints with updated settings have been working well.

This stuff prints so nicely. I used default print settings for my AnyCubic Photon S and had no problems at all. I think it even printed better than the sample resin I received with the printer. I am not sure if you can tell from my photo but the flat base of part is not only smooth but it has a gloss like quality to it. The cage portions of the print and the internal letter structure have an almost satin look. The finished product is farily flexible but still breaks if you go to far. Definitely more flexible than other resins I have used but I wouldn’t go so far as to call this a flexible resin. I would say it has about the same flexibility as ABS which is no surprise since this is ABS like resin. Post processing was simple. Quick wash in IPA followed by drying followed by UV cure. It isn’t the cheapest resin available but the $25 price tag is not terrible for a resin that is so easy to use. I highly recommend and will buy more in the future.

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

Im really satisfied with the way things turn out with this resin. Of course with any 3d printing you have to have a good enough printer as well.

I havent printed a lot other than chess pieces for my sons chess club at school with this. But so far the pieces have held up well to grade school age kids using them and knocking them off the table. The cure time on the finished pieces took longer than what I am used to with other resins which I am having a hard time figuring out. I have had to add about 10 minutes to my cure times. The longer cure times arent really a big deal to me, it just surprised me.

Conforme à la description. Emballage soigné

Printed with the recommended settings: 50 seconds first layer, 2.5 seconds per layer after that. For larger and heavier models, other resins I use want longer bottom layer exposure times for several layers. This resin wants you to use a raft. I dont really print large models, usually just 2-3 tall, so I hollow them out and usually leave a large portion of the bottom open, then plug it after curing. Totally satisfied with the resin. The odor is typical.

Habe kaum brauchbare Teile damit drucken können, trotz verschiedenster Anpassung der Parameter. Drucke ja schon ein paar Jahre, aber sowas habe ich noch nicht erlebt. Die weingen brauchbaren Teile ließen sich unglaublich schwer reinigen. Auch in der Waschbox setzte sich das Harz überall zu einer extrem klebrigen Masse ab, die sich kaum mit verschiedensten Lösemitteln entfernen ließen. Wie extrem zäher Kaugummi. Eine richtige Sauerei. Hat mich Tage gekostet, alles wieder sauber zu bekommen. Daher kann ich dieses Harz nicht empfehlen. Werde es entsorgen und nie wieder in die Nähe meines Druckers lassen.