























BETOOLL 2400lb Capacity Heavy Duty Swing Hangers for Wooden Sets Playground Porch Indoor Outdoor & Hanging Snap Hooks Silver Set of 2
-
Josh
> 3 dayMy only complaint, the hardware must be replaced with galvanized for install in treated wood, an additional $20 cost at the local hardware
-
Terry L. Strait
> 3 dayTruly well made product and easy to install.
-
Brandon
> 3 dayJust installed these to hang a porch bench. These seem very solid so far.
-
Alysa Hermann Jr.
> 3 dayVery well made and sturdy. The only thing I had to do was put some WD-40 on them because they were squeaking really loudly at first.
-
Pat in Idaho
> 3 dayThis review is for the three products, all purchased on Amazon, that I used to construct my swing set. Squirrel Products Combo - High Back Full Bucket Swing (Triangle and Chain Dip) and Heavy-Duty Swing Seat with Carabiners- Green, https://smile.amazon.com/gp/product/B081VWPMP9/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 ECOTRIC Heavy Duty Steel A-Frame Swing Set Mounting Bracket Green w/ Mounting Hardware (2 Brackets), https://smile.amazon.com/gp/product/B084RHDNSL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 BETOOLL 2400 lb Capacity Heavy Duty Swing Hangers for Wooden Sets Playground Porch Indoor Outdoor & Hanging Snap Hooks Green (2pcs) (My setup required 2 sets) https://smile.amazon.com/gp/product/B07CVDFV3D/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 To construct the swing set I had to purchase locally, one – 4”x6”x10’ beam, and four - 4”x4”x10’ posts. I used pressure treated wood. I cut the beam down to 8’6”, this left a finished swing set that was 12’ wide at the base. The 10’ legs I cut down to 9’ 4” this made the swing set 8’ 6” high to the bottom of the beam. I will be burying the legs 6”. The legs sit 7’3” wide at the base. The finished swing set sits in an area 12’ x 7’3” In researching the brackets on Amazon (the ones I purchased, as well as others) reviewers stated they had to make the ends of the beam smaller to fit in the bracket. I used a 4 ½” angle grinder with an 80 grit wheel for this and finished it off with a pad sander, this took maybe an hour to complete both ends. I painted all the pressure treated wood with one coat of primer and two coats of exterior finish color. For the assembly I predrilled all the holes for the lag bolts and sprayed the threads with Rust-Oleum, cold galvanizing compound paint. The swing hangers, made by Betooll were mounted per the instructions that came with the Squirrel Products swings , they also included an Outdoor home safety handbook that the U.S. consumer products commission puts out. I first assembled the brackets to the beam. To set the swing, I carried the beam up a 6’ ladder and my wife installed each leg has I held the beam. Once the leg bolts were installed, we had friends help us shift it into its final spot. The swing set is awesome and the baby loves it!
-
Matt
> 3 dayGood sturdy hanger, but after about a week on my porch swing they started squeaking very loudly, and its hard to relax with the noise.
-
Jerry Kirby
> 3 dayI ordered a set of two just to see how this would work. It didn’t come with four lag bolts that were needed to install. The closest hardware is about 25 minutes away and the bolts were about 2.70 each and I needed 4 for the install. Once I got the bolts the install is pretty simple. Drill holes with a bit.then drill the lag bolts using a socket attachment. It’s best to use a 1/2 inch drill that is a plug-in not cordless. After that drill away. The swing works great just wish that the bolts came with it as the second set of two I bought came with them. Now I’m out more time and money to return the 4 I got for the second set.
-
C. Winslett
> 3 dayMade an awesome swing set for my grandson!
-
Jayjackson
Greater than one weekJust received hangers and was surprised that four 1/2 inch lag bolts were included. The hanger is made of cast iron a d is very heavy duty. I used them to hang a 60 inch wooden porch swing and I think the swing will break before the hangers ever will. I don’t think I needed such strong hangers but I will never worry of them failing. Make sure you mount them in the center of a beam or the 1/2 bolts will split the wood. Durability should not be a problem....rust on Y time will tell.
-
M. Smith
> 3 dayWe bought this to replace a bolt that had broken on the swing. So far this is working great