Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version (40x10mm, Brown)

(1906 Reviews)

Price
$8.37

Quantity
(10000 available )

Total Price
Share
316 Ratings
261
25
14
3
13
Reviews
  • jess

    > 3 day

    This fan was suggested by Amazon for use with the INVASION for Raspberry Pi 3, 2, B+ and 2B. If you are planning to use it with that device then beware...the chord that is attached to this little fan is much longer than you want to try and jam in that little case. We really struggled to try and make it work and even after all that may be returning the case because it just doesnt work as well as wed hoped. The fan however seems like it would be fantastic for the right case. May update the review if we can get it working in another case.

  • Scotty

    > 3 day

    Was looking for a fan to keep my raspberry pi cooler while I have it mounted on to a ender 3 3D printer and it does pretty good, even with it being in inside a enclosure tent for the printer.

  • Tony Putra

    > 3 day

    Nice seller and good quality product

  • Dan Jespersen

    > 3 day

    Origin not clearly marked.

  • Bates Hotel

    > 3 day

    Very Happy with this fan, quieted my DVR to near silent!

  • Ms. Ruby Thompson

    > 3 day

    Best fan, works so nicely, and it’s soooooo quiet. I just wish it had a bit more cooling capacity.

  • Greg Straub

    09-06-2025

    I bought and tested a few 5v fans. The Noctua fan outperforms them all by ~20 degrees Celcius. The build quality is incredible and the soft silicone corner mounting points and fully sleeved cables are a plusses. I was able to use two of the included barbed rubber mounting rods instead of screws.

  • Palindrome

    > 3 day

    More expensive than other similar fans but very well made and quiet. I was replacing a fan in a charging station and bought this and a cheap fan to compare the difference. This fan was way quieter to me and worth the purchase. It was thinner than the 20mm thick fan and less air but the charger does not feel any hotter to the touch than with the old fan. With the Noctua the charger is now virtually silent. I have to get right up to the cooling ports to feel and hear it working.

  • Robert B.

    > 3 day

    I use them on my Pi 3 to keep it cool, works great and quiet.

  • 3D graphics guy

    Greater than one week

    I used this to replace the extremely noisy case fan on my Ender 3 printer. I had replaced the main board so I could choose either a 24v (which Noctua doesnt have as best I can tell) or 5v version. The original fan sounded like a jet engine when it was running and this one is virtually silent.

NF-A4x10 5V HeaderNF-A4x10 5V Header

Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and an AAO standard frame, the NF-A4x10 5V is a dedicated 5V version of Noctua’s highly optimised, premium quality quiet 40x10mm fan. Smooth Commutation Drive technology and Noctua’s reference class SSO2 bearing ensure superb running smoothness and excellent long-term stability. Topped off with modular cabling and the OmniJoin Adaptor Set, the NF-A4x10 5V is a premium choice for demanding 5V applications.

NF-A4x10 5VNF-A4x10 5V

5V version

Many devices such as network or storage solutions use 5 volt 40mm fans. With the same operating voltage and the included OmniJoin adaptor set that makes it compatible with proprietary fan headers, the NF-A4x10 5V is ideal for replacing noisy or broken 5V 40mm fans.

Please Note: Being a 5V fan, the NF-A4x10 5V cannot be run at 12V and will be damaged when used with typical 12V power sources such as PC motherboard fan headers.

NF-A4x10 FACNF-A4x10 FAC

SSO2SSO2

NF-A4x10 hubNF-A4x10 hub

NF-A4x10 ISMNF-A4x10 ISM

Flow Acceleration Channels

The NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

SSO2 Bearing

The NF-A4x10 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Reduced motor hub size

Thanks to its streamlined, compact motor design, the NF-A4x10"s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10"s superior airflow and pressure performance.

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

NF-A4x10 5V bannerNF-A4x10 5V banner

Please Note:

Being a 5V fan, the NF-A4x10 5V cannot be run at 12V and will be damaged when used with typical 12V power sources such as PC motherboard fan headers.

NF-A4x10 PWM table NF-A4x10 FLX table NF-A4x10 5V PWM table NF-A4x10 5V table
NF-A4x10 PWM NF-A4x10 FLX NF-A4x10 5V PWM NF-A4x10 5V
Connector 4-pin PWM 3-pin 4-pin PWM 3-pin
Voltage 12V 12V 5V 5V
RPM: Max: 5000 / Min: 1000 4500 Max: 5000 / Min: 1000 4500
RPM with L.N.A. 3700 3700 - -
Acoustical Noise 19,6 dB(A) 17,9 dB(A) 19,6 dB(A) 17,9 dB(A)
Acoustical Noise with L.N.A. 12,9 dB(A) 12,9 dB(A) - -
Size 40x40x10 mm 40x40x10 mm 40x40x10 mm 40x40x10 mm

Related products

Shop
( 2402 Reviews )
Top Selling Products