Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Layla Bartell
> 24 hourI purchased a Z370 motherboard and installed an I5 8400 CPU and intended on using the stock cooler, since the chip obviously wasnt going to be overclocked, and runs pretty cool compared to the Sandy Bridge CPU it replaced. That was last November.
-
David
> 24 hourIt is pricey but doesnt compromise on anything. Super easy installation process and they even include a long screwdriver just in case you dont have one that is long enough. Plenty of clearance for ram and top pcie slot. Also the included fan is awesome: high performance with low noise.
-
david fowler
> 24 hourexcellent craftsmanship
-
paul V
> 24 houri Love the innovation of the mount style,. I mounted the noctua fan underneath and a 14 inch rgb fan on top , no problems dissapating the 125w tdp of the overclocked i9 with the bonus of dragging fresh air over the VRMs and ram
-
C. Hazard
> 24 hourMost people looking at this already know what theyre buying, have done the reading ,etc.
-
SCrashNeT
> 24 hourEs extraordinaria la calidad de esta marca, y me llevé la sorpresa que era compatible como lga1700 aunque la descripcción no lo menciobaba...
-
John Daigle
> 24 hourAfter much research and vacillation between water vs air cooling, I went with the noctua. My Skylake 4ghz clocks to 4.7ghz with this--with water maybe I could get a little more but it doesnt matter to me; I mostly run it at under 4.5 anyway. The fan is dead silent and mounting the fan on top, as shown here, allows my low profile memory not only to fit under it but to be inserted or removed (ATX case). I also like the orientation of the radiator. Why? Physics--the farther out the mass from the point of attachment, the more leverage on the motherboard; this orientation with the radiator parallel to the motherboard keeps the mass close minimizing the leverage--the fan also blows right down onto the memory.
-
Brian Bechtel
> 24 hourArguably one of the best air coolers out there for an SFF build. (5900x)
-
Polymath
> 24 hourYou cant go wrong with Noctua. I bought this when I converted my old PC into a NAS and the original water cooler was end of life after 8 years! The Noctua seems to keep the temps about the same as the water cooler did. I have a big fan controller on the front and I can see the temps all the time so I know if its getting hot, which it does not. My ambient temps are around 75 max and the CPU is always below 30C, no O/C and running freenas OS. Fan is quiet but not completely silent, gets only a little louder when the fan controller kicks it into high. Still not bad. The case fans are louder.
-
William
> 24 hourThis cooler is very big. Can take over ITX boards. Works great keeps 3900xt under 75c at full load.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
