Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Jack C.
> 3 dayFits AM4 sockets
-
Ciaran
> 3 dayWorks well in a 4U case (fan under). Looks nice, does a decent job cooling, not as good as my bigger DH, but is more then adequate for cpus pushing around 115W TDP.
-
MAMMALHAMMER
> 3 dayAfter switching to this Noctua cooler and Noctua NF-S12A case fans my PC is silent. Not hearing the shifting whine of the stock wraith prism cooler or the motor and bearings of the case fan I had before is worth the money. My temps are fantastic at idle and during a 100% CPU benchmark test. Ryzen 7 2700x.
-
Colleen Considine IV
Greater than one weekUsed on a AMD Ryzen 5 3600 CPU in a Cooler Master NR200 case. Substantially lower temps on both idle/low load and stress test.
-
Peter Stevens
> 3 dayFitted well in the cooler master NR200P case, although my current setup is a 65TDP chip, the cooler keeps it below 60 degrees when fully loaded with Prime95.
-
Richard Determann
> 3 dayI love this cooler, the old school top down style really helps to keep VRM, mosfet and northbridge cool alongside the CPU.
-
Lee
> 3 dayIm so impressed with this fan. I decided to build a gaming PC but wanted it small, so went with the Thermaltake Core V1 case and a mini ITX Z97 board with i5-4690K so I could overclock. I was going to do a self contained water cooler but all the ones around $100 had so so reviews, with most people replacing the fan on the radiator with a Noctua one anyway. So thought Id take a chance and just go air cooling. The fan in the photo looks small but its still huge. Fits fine in my case with the fan under the radiator vs on top like in the photos (it supports both methods as well as adding a second fan). I overclocked my system from 3.5Ghz to 4.2Ghz and on idle Im running around 26-29 degrees C and when using 100% under Prime95 for stress testing I never go over 59. Highest Ive ever seen it hit was 61. Even when on full at 59 degrees the fan is insanely quiet, to the point that I had to turn the TV right off to try and hear it. With the system on the floor you cant hear it at all. Very impressed and highly recommended. Photo shows my rig with it installed to show the size.
-
M. Valencia
> 3 dayAwesome CPU cooler!! I just built a new rig with an i5-8600k and this cooler keeps it nice and cool at 28C idle / 65C MAX under full load even OC at 4.7 GHz on all 6 cores. Installation was by far the easiest Ive ever done. Yeah its big, no its HUGE, but you cant complain about the performance. Buy it and you wont regret it. Love the fact that even on silent mode, this thing still moves a lot of air and keeps temps under control and best of all, you can barely hear it. Noctua hit it out of the park with this one.
-
Julio
> 3 dayIm replacing the stock cooler. Its great! so quiet! temps went from 85 to 50.
-
プラモ素人
> 3 dayPC筐体のCPUクーラーサイズの上限が130mmなのでファン位置を変更して高さ115mmで使用。
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
