Radar Detector Hardwire Kit,Direct Wire Wiring kit for Escort Valentine One Uniden Beltronics Cobra Radar Detector Quick Connection Plug and Play Power Cord Cable(13FT RJ11)

(1543 reviews)

Price
$19.99

Color
Quantity
(30000 available )

Total Price
Share
75 Ratings
58
5
1
1
10
Reviews
  • MAB

    > 3 day

    You cant go wrong with this wiring kit for a Valentine One radar detector. Everything you will need is included! You cant even get the cord from Valentine for this price!

  • Sujay

    > 3 day

    Very easy to install in the fuse box. Appreciated that the kit came with everything I needed - fuse remover, multiple type of fuse connectors etc. The power cord is plenty long for SUV. Only slight problem was the ground wire head was too small for the only available grounding point/nut that was close to the fuse box. Hope this lasts now…

  • Tim Cooper

    Greater than one week

    A must have to clean up the look inside your vehicle, no wire coils dangling all over if its done right almost all wires are hidden. A clean look.

  • Adam

    Greater than one week

    Installed as expected. Worked great. Even lasted through my uniden r7s suction cup detaching and the whole assembly hanging by the rj11 wire alone. By the 3rd or 5th time my uniden un-suctioned, however, the rj11 had enough. Ground wire break somewhere inside the connector (verified with multi meter). So. Dont be lazy. Un plug/remove your uniden when you park!

  • Francisco comas

    Greater than one week

    This product was easy to install. The wire was more than long enough for my car and reached all the way to my rear view mirror for a nice and clean set up. Highly would recommend this set up if you don’t want your car battery to drain and want to keep your cigarette lighter port free of plugs. Just make sure this is the right connector for your radar.

  • Jason Burton

    > 3 day

    Worked well, was easy to install and I tapped into the power outlet fuse easily on my Genesis G80.

  • Mr. Lawson Lockman III

    > 3 day

    Seems well thought-out.

  • Donna Young

    > 3 day

    Kit is a great idea but, the RJ11 connector is loose in the radar detector which results in intermittent loss of power (and no protection from radar guns). I have to wiggle the connection for the power to come back. None of the add a fuse connectors would work in my 2022 GMC Sierra, finally had to find a hot accessory circuit pin and connect the power lead to it and ground to the frame. Waited too long to install so return is not an option.

  • T. J. Perkins

    > 3 day

    I suspect I could have done this much more quickly if my fusebox was not located in Iceland. Instructions helpful but pay special attention to the proper fuse outlet

  • Anthony

    Greater than one week

    This definitely help with my wire management.

Upgrade the 2nd Generation Radar Detector Hardwire Kit(RJ11 / 13ft):
It"s a must-have if you’re using a Radar Detector in your car or truck. It connects the Radar Detector directly to the fuse box under the dashboard for power from the vehicle’s battery. Our Radar Detector hard wire kit frees up the 12-volt power socket (the cigarette lighter) for other uses. as the hidden wiring,it will make your car more neat.

Specifications:
★ Connector: RJ11
★ Output: 12V / 2A
★ Working Temperature:-40-80℃
★ Cable Length: 13ft (4M)

Package Contents:
★ Plozoe Hardwire Kit for Radar Detector x1
★ Fuse Tap Cable x4
★ Installing crowbar x1
★ Back-up fuses x2

Installation Steps:
Step 1: Connect the Red Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Locate the Fuse Box and find an ACC Fuse Slot in it. ACC Fuse Slot only has power when the ignition is on.
Step 3: Remove the original Fuse in the ACC Fuse Slot and install it into the Bottom Slots of the Fuse Tap. Insert the same size of Fuse we provided into the Top Slots of the Fuse Tap.
Step 4: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box.
Step 5: Crimp the Black Wire and screw it down to any non-coated metal bolt/screw in your vehicle to ground it.
Step 6: Connect the RJ-11 "telephone style" jack of the Hardwire Kit to the RJ11 input of your Radar Detector, and then the installation is completed.

Warm Tips:
★For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle"s critical components, such as the Air Bags.
★ If you don"t have experience on installing the hardwire kits for the Radar Detector, please ask professional for help.

Related products

Shop
( 1768 reviews )
Top Selling Products