SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

Purchased it to protect the top of a glossy black acrylic display pedestal. Looks superb! The protective paper cover was easy to remove. I would buy again.

I bought it to cut into smaller pieces. It can be cut into smaller pieces, but I am not good at that part. I need a better saw. That has nothing to do with the Acrylic sheet though. The acrylic arrived shiny and new, well packaged and ready to be used. I would purchase it again if I need more acrylic.

Arrived in excellent condition. Packaged extremely well by shipper and as well by vendor. Quality piece of acrylic -as acrylic goes. No scratches. Protective adhesive backed paper on both sides; inside bubble wrap sleeve; inside form fit box; inside large box with inflated packing material. Will use as reflective base for product photography.

These plexiglass-glass sheets are perfect for the project I am working on. I needed a material that would be both strong and transparent. This material is perfect for the job.

Bought a 12 x 12 x 1/4 sheet of acrylic to make new foot plates for my trim router as the original factory foot plate is too basic and its center hole is too large for standard guide bushings to be fitted. The sheet arrived well-packaged in bubble wrap inside a form-fitting box inside a larger Amazon box, which also contained some Forstner drill bits I needed for this project. It measured 1/16th under the 12 inches on both sides. I assume that the original large sheet is marked at exactly 12 inches and the cutting blade running along that line has a width of 1/8. Hence the loss of the 1/16th inch per cut sheet. Not an issue for my project, but would be if someone wanted exactly 12 square. The brown paper protection was ideal for marking out the sheet and it was left in place until all cutting, sanding and drilling was completed. I was able to power sand the acrylic up to the lines on the paper without the paper coming loose or fraying. The acrylic cut cleanly with my table saw (40 TPI), jig-saw and it was center-punched and drilled cleanly on my drill press (1700rpm) without cracking or melting. In conclusion, I do not hesitate to recommend this product.

We bought the 1/4 inch to cut a new basement drain cover. Ours is a diameter we could not find. Then drilled holes and cut a slot for our furnace drain. You can walk on top of it and it is sturdy. Problem solved!

I was able to cut and drill just like the description said. I made a very nice router base. I will buy again now that I know I can make any router base I might need or any other jig I might need. Very happy with the product.

Quality acrylic. Arrived on time, good value

Excellent

Very happy with this acrylic -- does great when laser cut!