AC Infinity AIRCOM S10, Quiet Cooling Blower Fan System 17 Front-Exhaust for Receivers, Amps, DVR, AV Cabinet Components

(1157 Reviews)

Price
$53.99

Quantity
(10000 available )

Total Price
Share
216 Ratings
182
27
1
4
2
Reviews
  • Myles

    > 3 day

    Quiet

  • Regina LaShay

    > 3 day

    Ive never used a fan system before, but knew my electronics were getting hot (pretty sure an older one had thermal overload and died). Since I just bought a new Denon AVR for about $1,200, I knew this was the time. It didnt take much research to find the Aircom S10, they are the king in this field it seems! Quiet, automatic, good looking, heavy and well built, this exceeded my expectations. I bought a front exhaust model since my AVR is pretty boxed in on all sides and top/back. HEAT IS THE ENEMY OF ELECTRONICS. So, for a small investment, I likely doubled or tripled the life of my nice new amp. Do it. Great job Aircom!

  • Amari Schuppe IV

    > 3 day

    One of my best purchases. It runs automatically, keeps my equipment cool and I cannot hear it.

  • StarMan

    > 3 day

    I have this unit cooling a 7 channel amplifier that is powered on 12 hours a day for 7 days. Most times my amplifier is on low volumes, but during sporting events or on busy weekend nights where the volume needs to be turned up a bit it gets hot. The AIR COM i got sucks out the heat from the bottom and out from the front, makes it perfect for the amps location. It insures that the amp stays cool when needed increasing its lifespan. I’ve had this unit for nearly a year now and have not had a single issue with the AIRCOM nor the amp. Super happy with it.

  • Brandon

    > 3 day

    This thing works flawless, is super quiet (silent most of the time), is reasonably priced, and protects a much more expensive piece of equipment. Couldnt be happier with this purchase.

  • Justin H Atchison

    13-06-2025

    Works great on stereo in tight space that needs air vented out front to keep it cool. Never hear it running & turns on & off as receiver hits certain temps. Worth the $ to keep receiver lasting longer.

  • DIYGUY87

    > 3 day

    Great addition to my new Yamaha RX-V383 5.1ch receiver. I bought it because I got a new stand for my TV with a square glass base sitting on top of the receiver blocking the vents, Not to mention these AV receivers dont have cooling fans. I can say this should vastly improve my receivers lifespan. The instructions are a little hard to understand but I keep it in Smart mode and it turns on every couple of minutes, runs for a few minutes and turns off. Its a few inches longer than my receiver front to back and sticks off the ends but it was either the 17 or the 12 and that was way too small. Very good value for the price.

  • Charity Abshire

    > 3 day

    One word (excellent),I purchased 1 a few years ago but smaller for entertainment cabinet, awesome, purchased this one for theater amplifier..yes,yes...

  • Tracy Krebs

    > 3 day

    Works!

  • Deon Versfeld

    > 3 day

    We live in a place where it gets very hot (90-100 degrees F) and that means my AVR (Yamaha RX-A1050) runs way too hot. I looked for a professional cooling system and once I saw the Infinity AIRCOM S10 I was convinced it will do the job. It took only 8 days from the USA to South Africa. Installing it was quick and easy. On a cooler day (77-85 degrees F) I run the fans on the slowest speed and my AVR remains at a acceptable temperature. On warmer days (90 degrees F +) I set the fans to the second speed and the AVR remains nice and cool. I really don’t see the need of putting the fans higher than this, so there is no noise disturbance. If you really want to run the fans at full speed and it is noisy just crank up the volume ;-) Good quality product that does a great job protecting my AVR and giving me peace of mind.

A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components. Protects components from overheating, performance issues, and shortened lifespans. Programming features two thermal trigger modes and four speed control options. Contains three dual-ball bearing blowers with PWM-controlled motors to minimize noise. Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Front | Airflow: 160 CFM | Noise: 24 dBA | Bearings: Dual Ball A quiet cooling fan system designed to be placed on top of AV components such as receivers, routers, game consoles, and AV cabinet components. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The controller on the front of the cooling system features a smart thermostat trigger and fan speed control. The steel enclosure houses two dual-ball bearing blowers that pull heat out of the component and exhaust towards the front. The dual ball bearings also allow this fan system to be mounted horizontally or vertically. Its low-profile design enables the unit to fit in tight spaces. Includes corded power adapter to plug the fan system through an outlet. Intelligent Programming There are three programming settings available which includes two temperature trigger modes. The fans can also be set to run continuously or be turned off. Four fan speeds are available for each active mode and will determine the speed at which the fans run when they are triggered. This ensures optimal airflow and noise levels for your application. Design and Construction Each system features dual-ball bearing blowers rated at 67,000 hours and are certified by CE and RoHS. Blowers contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top. Product Identification Manufacturer AC Infinity Inc. Product Name AIRCOM S10 Product Model AC-ACS10 UPC Code 819137020320 Product Dimensions Total Dimensions 17 x 13.5 x 1.5 in. (43.2 x 34.3 x 3.8 cm) Cord Length 72 in (6 feet) Product Performance and Technical Specs Number of Blowers 3 Exhaust Front Total Airflow 160 CFM Total Noise 24 dBA Static Pressure 1 mm-H2O Operating Voltage 12V DC Power 8.8 W Current 0.73 A Wall Adapter Input 100 to 240V AC Operating Humidity 35 to 85% RH Operating Temperature 0 to 158°F Fan Bearings Dual Ball Mounting Positions Horizontal or Vertical L10 Life Expectancy 67,000 Hours Top Weight Capacity 30 Pounds CE Certification (Whole Product) PDF RoHS Cert. (Whole Product) PDF Product Manual Product Manual PDF

Related products

Shop
( 1368 Reviews )
Top Selling Products