COMOWARE Hole Saw Kit for Wood- 16 Pieces 3/4’’-5’’ Full Set in Case with 1pcs Hex Key, 2pcs Mandrels and 1pcs Install Plate for PVC Board Plastic Plate Drilling Drywall and Soft Wood

I bought these hole saws to drill through a laminated 3/4 piece of plywood. I needed two holes and the hole saw felt dull about half way through 1st hole. The 2nd hole was a challenge as the hole saw bracket broke and stripped at the chuck. I would say these are made for very light projects but they are cheap enough to be disposable.

All pieces fit together nicely and seems well balanced against wobble. This kit kept me busy all day yesterday I drilled 100+ holes with ease. I used 3 of the included sizes which had zero issues. I dont bore large holes usually so now that I had a need Im glad I thought ahead and purchased this instead of double the price at the big box store.

This kit is very well thought out and nice. The only problem I ran into was bending a drill bit on hole #9. I now have a useless kit, which I will look to see if I can find replacement drill bits. I think adding 2 or 3 extra drill bits would make this kit perfect.

Its no Milwaukee or Dewalt but it will work for light, occasional use.

Depth of circular attachments doesnt exceed 1/2 in. Also drill bit is poor, needs to be replaced with one thats pointier.

Good bang for the buck. Little thin and dull, but I have the ability to make it work. Quality of the product could increase, but for the price it’s on par. If they were to make a better quality product it would cost more so keep that in mind.

These holesaw‘s work like they should the only issue is they aren’t deep enough for the project that we were doing. We were drilling through a 2 x 4 and they were not thick enough to go all the way through the 2 x 4.

Overall, it appears that while the product may be a cost-effective option, customers should carefully consider its limitations before making a purchase. It may be worth investing in a higher-quality tool that can handle a wider range of materials, in order to avoid disappointment and frustration during use.

This cuts well and quickly. I use it to make flat lap backing plates out of wood and acrylic. It is sharp and cuts a nice round disk (or a nice round hole if you rather. There are not directions included so be aware that you need to figure it out on your own (if you have ever used a hole saw,then you pretty much got it). I use it with a drill press but this would work just as well with a handheld. Make sure to work slowly to avoid excess heat buildup. I also use a little soap on the blade to allow it to cut a little easier. Overall a handy large hole saw.

wood but its not deep enough.