Coolneon Brass Rods 3/16 x 12,6PCS,Knife Handle Material,Knife Handle Pins,Brass Round Stock,Knife Pins,Brass Pins for Knife Handles Scales,for Hardware,Novelty,DIY,Hobby,Model Car Plane Boat Ship.

And I like the convenient reusable package they came in. Yep, made in China

I like the finish of all pieces, and the size of the 3/16 rods is accurate. I found the 5/16 rod to be very slightly undersized, but only by 0.0005. It makes for a snug slip fit in an accurately sized hole. The 3/8 rod was .0015 over which made it a press fit in a 3/8 hole. While I have done pins for knife handles, I do plenty of other DIY crafts and enjoy using brass for the appearance and workability. Great to have on hand!

I got these for my husbands knife making and he said they were perfect. He likes them very much and they look pretty good in his knife handles. He says you cant have enough of them around when making knives.

Sometimes the BF likes to fabricate things for his minis. A good post to attach some of that plastic to is always a must. These little rods are perfect for that purpose, he can cut them down to size and hand drill a hole to put these in to help keep his minis together, especially some of the more unbalanced ones. These are strong enough that they might even work as a base for a clay creation. I like that they come in a plastic reusable container that keeps them straight and is easy to identify.

I needed a bit longer brass rod to utilize as a soft punch for a project. The old one I owned was a bit too short. This 12 piece of round stack brass shoild be perfect for my intended use at a price that wont break the bank. It was supplied in a plastic slip on case which I believe I will keep as a storage place for the brass rod. Met all of my expectations!

The brass rods arrived nicely packaged in a blue square plastic container, like larger drill bits are packaged in. I purchased these to cut and use as inlays on the guitar fretboards Im making. The 1/4 diameter is right on, so they will drop into a 1/4 hole nicely. The pieces are easy to cut and polish. I did a test of one in a small scrap of fretboard and it turned out great. There are two 12 rods in the package, at just under 1/4 per fret marker I should be able to get about 90 disks out of this package. I will purchase a package of the smaller diameter (1/8) for the neck side markers. Quality product, true to size, and packaged well. Update: I purchased the 2mm diameter brass rods and they are the same quality as the 1/4 rods. Nice straight, shiny brass rods. They will work for the side fret markers, or on the front of the fretboard to add some design to the markers. Both sets of brass rods I have purchased from this seller are perfect for what I need.

I ordered these at my husbands request. Hes getting into knife making (just what a man with a million other projects needs!) and thought these brass rods would work for his newest hobby. I have to say, he did a great job of repairing my favorite filet knife that was so old, the scales (I learned a new term!) split and were in bad shape. He fashioned a new handle and put all back together with these brass rods. So yeah, five stars from me for that reason alone!

I ordered these brass rods for my husband to use with his hobby projects and role playing game miniatures. They arrived in good condition and were the correct size and shape. The quality of the brass is good and they seem to be well-made. He has not had any problems with them so far. The only downside is that the shipping took a long time. It took about two weeks for the rods to arrive, which was longer than we expected. However, the seller did communicate with us and let us know that there was a delay in shipping. Overall, we are happy with the purchase. The rods are good quality and they arrived eventually. We would recommend them to anyone who is looking for brass rods for hobby projects or role playing game miniatures.

These rods are great for craft projects. I use them as rods/axles in small 3D printed objects and they work great. Theyre true to size and look much nicer than a steel rod. I got 1/16 diameter rods and they can be bent with enough effort, but stay straight otherwise (which is what I want). Theyre also thin enough to be cut with pliers, no saw or other tool needed (though Im sure the larger diameter rods would require more robust tools for cutting). These came well protected in a plastic container that makes for easy storage as well. All in all, super pleased with these and the price is very reasonable. Definitely recommend!

COOLNEON’s offering of 3/8-inch by 12-inch brass rod arrived packaged in a nice plastic tube. The rod was straight, with a smooth finish and the correct dimensions. I mounted it up in my lathe and tested the material for machinability. There were no issues. This rod is destined to make brass highlights for my metal projects.