Creality Ender 3 Glass Bed Upgraded Platform 235x235x4mm for Ender 3 S1/ Ender 3 / Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro, 3D Printer Tempered Glass Build Plate Surface

Didnt receive the clips.

Great glass bed, a must have if you buy an ender 3 pro printer. Smooth finish on your print and great for high temperature printing

Ive had difficulties with this plate, but it can easily be my fault. Ive tried increasing the temp and using alcohol to clean it, but Ive still had adhesion problems. But I would still recommend giving it a try, its easy to install and worth giving a try since most people have success. It does hold heat well since its glass, but you may need to heat it up longer than usual at the beginning. I will probably give it another try if my original plate fails again.

I bought a new plate in Jan 2021 and it worked great for about 10 months. Then re-ordered the same product recently, and it didnt have enough black grip stuff, so no filament would stick to it. I sent it back for a replacement, and the new one had the same problem, must be a bad batch. Got a refund, and now Im using the old one again, still works ok.

I make parts and so I need to use stronger materials for function in machines. PETG, PETG Carbon fiber, And PC carbon fiber. The temperature for the bed is higher and normal removable flexible build plates dont work. Even the ones that come with the PETG get stuck and are destroyed after one print. This holds up about 9 months of continuous use. And I use a build plate adhesive designed to allow the PETG to be removed without sticking to the glass. I may try some smoot glass, but the bottom surface is fine with this, textured surface.

Its the truth! Get it. Clean with isopropyl first.level the bed. And enjoy never having issues with adhesion for PLA again. PetG has givenme issues though but PLA and ABS work great. I still use a brim for ABS because or paranoia but its probably overkill.

I have adhesion problems with thinner prints but its work wonderfully for me since Ive gotten it

I put this bed on my Ender 3 pro and printed three larger prints. I haven’t used any glue tape or hairspray to help with adhesion. My only complaint is that it’s slightly textured and I’m not used to that type of bed( I’ve been using a mirror) but beside that this is an amazing product and would recommend buying if you are having adhesion problems.

Its nice arrived super fast, got it out put it on my printer and went back to look for the locking clips...nothing... tried original clips for basic print mat... WAY too small... so now I get to wait a few more days and order some clips, thanks for the heads up...

Im printing on the smooth side with PLA, and with a raft. I clean the plate with isopropyl alcohol before every print. I print the first layer at 80 degrees C, and the rest of the print at 65 degrees C; no hairspray, no glue sticks. Adhesion is fine during the print, and the part effortlessly removes once cool; dont have to pry it off. The only issue I have encountered so far is that the parts tend to warp at the corners; the raft corrects this. I havent experimented with temp settings beyond this, so there may be some other combination that works better.