4 Doors Complete TCP/IP RFID Access Control Systems with North American Standard Electric Strike for Latch Doors Keypad Reader 110V Power Supply Box Phone APP Remote Open Door

These panels install easily, program easily and work very well. I have 8 of them at a customer site and they function without issue while being used every day by over 50 employees. The seller answers any progrramming or installation questions quickly and seems to really care abot customer satisfaction for this product.

This seller says they will support you forever and they mean it. We installed this unit over 2 years ago and the support was great then. I recently had a question and sent them an email and they still responded within an hour with full details of how to address my issue. The system still works great and it saved us thousands of dollars compared to quotes we received to do the same thing. I would highly recommend this product and the seller. Great company!!

I bought this a year or so ago,, and used their support a few times. The unit is holding up great, the pieces are holding up great to. Ive contact support 3 separate times since and they are really quick to respond and have each time provided a solution on the first reply.

Long user review without an incentive… We purchased and installed 2x 4-Door Controllers to currently operate 7 (of 8 possible) doors. I did all the wiring and programming myself and only needed some assistance from other employees when initially pulling wires from doors to main controller. So far I’ve found that these do everything that our old EXPENSIVE ($7200+ monthly fees) Kantech controllers did, (in our previous building), but with more control and NO MONTHLY MONITORING FEES. The new system uses the same Low Frequency RFID, just without the proprietary accessories and coding. You can see by the pictures that we used way too many wires that were a bit bigger then was necessary, but that was 100% our fault. We had the ability to do just basic configuration, up to automatically setting doors to unlock after a certain user swipe and remain unlocked for the day, or lock again after entry. MANY 3rd party accessories work with this system, but they also carry everything you need. We went way beyond basic as I started realizing it’s all in the basic programming to unlock all the included options (free). We even installed an emergency lockout buttons so if someone shouldnt have access or is a threat before disabling their access, we can hit button (from anywhere) and lockout all doors instantly from being utilize. Push button again and it’s all back to normal. The only gong aditional you’ll need is a small 12-7ah backup battery or Backup UPS to plug into (both optional) in case of power failure, AND wiring to all your doors/sensors. Wiring of this size is very inexpensive and can be purchased in a box of 1000-ft. of either alarm wire or CAT-5 (Ethernet wire). This system can be used with additional RFID rings, key cards, bracelets, keychains, or even stickers from this seller or 3rd party. We did have a few questions on programming, and a quick email was answered within minutes. Instructions for Every feature you want is available online, and there is a corresponding video. The fact that the whole thing is a 12V system, makes it safe to install on your own, with no worries of doing something wrong. You can always have someone install it for you, but we have a drop ceiling, making pulling all the wires pretty simple, so much so, we over did it a bit. NOTE- PRE LABEL YOUR WIRES AS YOU PULL THEM for ease of connecting. You can even use colored tape to mark each set of wires to correspod to the proper doors/accessories. For example: Yellow = main entry door card/pin reader Yellow & Red tape = entry door exit button. Yellow & Blue tape = entry door exit IR sensor. Green= Storage room card/pin reader Green & Red = Storage room exit button. Green & Blue tape = Storage Room Exit IR Sensor ETC. Each wire bundle has its own wires inside it (typically 4-wires in each), or you can use CAT-5 (or cat6/cat7 etc.), which will give you 8 wires in each. We did end up using CAT-6 on the last door after realizing our initial wires were bulkier than necessary. Made it a LOT easier, as long as you noted which individual wire color hooked up to it corresponding accessories. Pretty easy with some forethought. I can’t say enough good things about support and they always answer immediately! We used a LOT of features, and about every available option on each door, including readers, PIN#’s, IT exit sensor & exit buttons. Also utilizing rfid (finger) rings, badges, key rings, and phone app. Certain doors are programmed to stay unlocked during business hours, while others need a swipe or PIN# continuously. Setup options are endless, but again, you can also just do basic setup and scan each time you enter. Did I say support is incredible? They are!! They’ll send you direct links to AMYTHKNG you’re trying to accomplish, and just when you think something isn’t working properly, they’ll let you know exactly what you did wrong without even sending a picture. We had one door that would read incorrectly, and they knew right away that we didn’t have a specific colored wire (grey) connected properly. Support is forever, free, and you can’t ask to many questions. They’ll even jump on a video call if you want, or help you set it up remotely if you’d prefer. ANYONE who leaves a negative review just isn’t trying or has no patience. If you want a secure system that does everything, you’re going to have to install it no matter what you buy. So if you have basic knowledge of how to follow direction and tighten little colored wires into wire ports with a tiny flat head screw driver, look no further. Once you program the controller with all your users and features you want, it’s also self contained and DOES NOT need to be hooked to network. Only need to plug into network for initial programming or if you need/want to make changes to the control board (also if you want emote access, but really not necessary). I did not receive or get promos made anything for this review, I just see the occasional negative ones and it’s obviously an issue with patience or expecting a secure system to somehow come pre-wired to your facility (impossible). Ask for HELP, and it couldn’t be simpler! Many Thanks to XIANGYUN and BRs/Wood Chen for the detailed assistance, the whole system has work flawlessly with your excellent support and videos. The couple initial (minor) issues we had were all due to us mislabeling, or not wiring something securely. Plus, we brought way too many wired into the box which caused self-inflicted confusion atone or two. It’s actually so much simpler than it’s made out to be if you pay attention. If there was anything I would change, it would be having a complete user manual with every option available in front of you. I understand why they don’t do this, as it would likely get confusing for those looking for a basic system and the manual would get overwhelming to a new user if they didn’t realize most of it is just optional programming and/or accessories.

The product was very easy to install and has great instructions and videos. I had some questions how I could make the product work for my application and support got back to me same day with a tailored text manual and videos to help complete the project. I used this in a commercial application but I think I may even install it at my house.

Really simple to connect and all included in the package

Dont let the price fool you. I thought its so much less than other competitors....it must not be so good Well I could not ignore the savings and thought I would give it a chance. It works awesome! So much more control of my doors and so easy to buzz people in. I liked it so much I went and bought the Biometric timeclock. Highly recommend!

The products works well as advertised. I had several questions over the course of three days and each time the responce with my questions were the very next day. Everything is working and buying another kit now for future jobs. Any similar 4 door access control system by the big companies such as Honeywell, CDVI and keri systems would cost 3-4k! How can you beat uder 500.00 bucks! the best value and I do love the customer service. Great job guys!!

Really easy to install and great step-by-step instructions.

Great product. Customer support is outstanding. We’ve installed many of these systems without issue. When we do have a technical question, Chen is quick to respond with phone, email and video support.