









DEWALT DW8311 4-1/2-Inch by 5/8-Inch-11 36 Grit Zirconia Angle Grinder Flap Disc
-
Nic
> 3 dayThis thing is awesome. I have a few uneven pieces of wood flooring that Id been burning quite a bit of time slowly sanding down. I decided to try this out instead and in about 10 minutes Id managed to do what would have taken a few hours with the sander. That being said, be very careful since it removes a lot of material very quickly.
-
CJ
> 3 dayWorks
-
Liz M
> 3 dayworks fine exactly what i need.
-
Mack W4MAC Walls
> 3 dayGreat addition to the welding cart, works as described.
-
MGGG
> 3 dayIs not the same threads as one bought previously- so if you dont use it immediately are your just out of luck? please take a look at my previous Dewalt (and other) 5/8-11 thread purchases- there is something wrong with this disc
-
ClLy
> 3 dayI like these but the life span of good grinding seems to be short for the price paid. The benefit though is the ability to grind without grinding hard flat points into the material. With practice you can follow the natural contour of the metal you are grinding. Use these when you want to shape or clean off the surface; used the solid grinding wheels when you need to grind down to get the final shape before using these disks.
-
Lumpy
Greater than one weekExpecting a great flap disc because its Zirc diamonds and its expensive. But it seems just the opposite. The cheap discs cut much faster, leave the same finish, last longer. The cheap discs cut faster. Whether removing paint, mill scale etc or more heavy use removing metal, grinding welds, the cheap discs do it notably faster. With the cheap disc you can run the grinder down the work and make a wide stripe of sanded area. With the DeWalt, you try and run a stripe and you get a really thin sanded spot flanked by a scuff mark. The cheap disc sands a stripe about 4-5 times wider than the DeWalt. The cheap discs last longer. On the DeWalt disc, the area near the edge of the disc becomes worn down and very shallow VERY quickly. The Other discs wear much more evenly. Once the DeWalt is worn, its like grinding with the EDGE of a regular grinding wheel. You no longer get that brushed metal look to the work that you expect with a flap disc. The DeWalts and the cheapies are both China made. Im going back to the cheapies.
-
tmeranda
Greater than one weekI bought these to prep metal straps for a welding bend test, and they do what they are supposed to do and they seem like they last a little longer then the previous brands that i have purchased. The price on amazon seems to be a little lower than what they are at the stores in my area.
-
jerry
> 3 dayWelder must have. These are great,and work great for sharpies lawn mower blades as well.
-
Pauly B
Greater than one weekGreat item, works as directed. One thing I could not find on the disk is the expiration date. I thought all discs had them.