Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle
-
mike armijo
> 3 dayits been bit tricky to install. Remember to reduce retraction settings
-
Alexander Ellard
> 3 dayI bought this when I was crazy focused on buying all the upgrades for my Wanhao i3, The install was super easy and took about an half hour, and there are videos showing install if you are unsure. I got stumped at securing the cooling block, which I forgot had a screw that attaches it and keeps it from moving. I have to say Micro Swiss makes a fine product and looks and feels like a quality product. I leveled my bed after install and I went right to printing and no clogs yet (knock on wood).
-
Don S.
> 3 dayI wouldnt use any other hot end with my Monoprice Maker Select V1 and Maker Select Plus. Both printer couldnt print worth a damn when I first got them. I installed these hot ends and they both imminently had good prints cranking out of them. The best part of this hot end? It allows me to insert and pull the filament right out of the extruder without having to go through menus and having the machine do it slowly. This helps a lot if you change colors often mid-prints.
-
Manuele Stefano
> 3 daytutto perfetto!!!consigliato
-
Kei
> 3 daythis is my first upgrade. it was a straight forward installation, maybe took 20 minutes. my Maker Select is now able to print at 100-150mm/s (after some fine tuning) woot. *Also bought a better cooling fan and ran PID Tune after installation.
-
Frank the Tank
> 3 dayThis thing is a godsend. If you have a 3D printer and want quality prints, this is an absolute must have. No excuses. This works so much better than stock.
-
Mark
> 3 daygreat product
-
P. Weston
> 3 dayImproves the print quality noticeably over the stock Hotend
-
Immanuel Murphy
> 3 dayThe Micro Swiss all metal hot end along with the machined lever and A2 extruder head drastically increased the quality of my prints Highly recommend to anyone looking to replace their extruder head. My Printer: Monoprice Maker Select V2
-
KF
> 3 dayBought this for my Monoprice Maker Select V2.1 / Wanhao / etc Well worth the price and tiny amount of effort for installation, immediate improvements printing some Monoprice PETG that was being a proper nightmare before with the standard extruder. I can not stress how easy the installation was, anybody who has familiarized themselves with the extrusion side of things will have zero issues installing this. As mentioned the PETG is sitting better, there is way less stringy bits running around the print (I couldnt get rid of these regardless of retraction settings on the stock head). Maybe my days of PETG arent over after this roll.... The packaging is also exceptional, especially when compared to some of the cheaper grade parts Ive received.