Moen CSI LR2352DCH Home Care 8-Inch Grab Bar with Integrated Toilet Paper Holder, Chrome

We have vacation rental properties and one of the things that happens often is the toilet paper holder is pulled out of the wall. Guests must use it as a grab bar (which a regular holder is not). This combo toilet paper holder/grab bar is the perfect solution. We are replacing any holder that gets pulled out of the wall with these!

I added blocking between the studs to support this grab bar. Works great and doesn’t take up a lot of space.

Very nice to have a handle and a toilet paper holder in one unit. The design is interesting. It is too short to screw to two standard US studs, so it comes with an interesting mount system. You drill 1 1/4 holes in your wall, then slip the mounts in and pull them tight against the back of the wall, like an oversize molly bolt. Screw the plates on the outside of the wall, then use the allen wrench to tighten the set screws in place to hold the bar on the wall. The wall mounts are quite well thought out. The set screws are the hard part of the installation. Theres very little room between the wall and the trim rings. There are three set screws per post. Tightening each screw with an allen wrench was tedious. After installed, it is sturdy and Im glad to have it. It has saved me from falling several times. I believe the load limit is 250 pounds, so its not as strong as a standard handicap hand rail. Arthritis sufferers will appreciate how easy it it to change toilet paper rolls. Slide it right on, no springing rolls, etc. Much easier plus gives you a safe handle.

Since this is the 3rd time I have ordered this well designed grab bar and toilet paper holder over the past 6 years, I obviously think it’s an excellent product. I had no problem adding the wooden blocks when mounting the item to my new bathroom cabinet next to the toilet. Since it was mounted on the side of the cabinet where the drawers were located, I just made sure the mounting blocks were of an appropriate dimension so as not to prevent the drawers from sliding smoothly.

Love the fact it’s a toilet paper holder and safety bar/handle. (Install done by contractor)

Love this mounting system. Ran into a very hard board and stripped a screw, fixed it with a sawzall. My daughter was worried but it is perfect and strong and works well. It gives you that little needed help to get off a low toilet, and it holds the paper.

This is perfect for the guest bath. It can be used as an assist bar and also holds the roll of paper as well. Excellent quality. I bought several so it is in all the baths. I didnt want to have a large assist bar and this is a perfect size to grab and then stand. Very pleased with the quality and appearance. The person who installed this bought a drill attachment that cut the dry wall circular hole to specified size for one end. The other end attaches to a stud. I had it installed with just a slight angle to make it easier to lift oneself and it also will keep the roll from sliding off. Highly recommend. Price is good for the quality.

Good product to help support surgery movement limitations. Easy addition to bathroom without making it look like a hospital room

Excellent quality and nice idea. Easy, quick mounting even a child can do, It is strange not to have to screw it to a stud. It just uses the sheet rock as a support. You will need to drill larger than the standard hole and over no stud, water pipes, or wires. It requires about a 1 1/2 hole or two. Read the instructions well. Ok for a non-DYI person. The mounts are not 16 or 24 apart. It mounts on very special supplied devices for sheetrock, but nothing like you have likely seen before. THEY claim they are stronger than three screws in a joist side but you have that option.

Works well for my husband . Contractor installed without issues