MUSETEX ATX PC Case Pre-Installed 6Pcs 120mm ARGB Fans, Mid-Tower Computer Gaming Case, USB 3.0 Tempered Glass Phantom Black Computer Case, MN6-B

I got this case in a lighting deal as this is was the case I choosen since I had a really long GPU card. but some issue I come across when I started using it for the last month. First of all, Hard Drive as a pain to install as there is no HDD caddy. The screw location are just annoying since I am required to take the front cover off and remove the bottom fan just to have access to the left side of the hdd tray. I recommend getting a Full Modular Power Supply it a little tight for my Non-Modular PSU wires. Cable management is alright as there are small slots that you can twist ties your cable to the back of the case. Fans are good and so is the RGB, but you cant control the fan speed as it is powered by a SATA cable with the fan Hub. Since this case has no dust filter in the front, Make sure you are ready to clean out the dust once in a while because dust can build up inside of your system very quickly. Overall, its a alright case that could have better improvement around the quality and structure of the case

My biggest issue with this case is that it is open on the sides. My concern with this is dust. It would be nice if there was some kind of filter on the side to help stop dust from getting in to my PC. Other than that, the case looks nice and the RGB fans look good. I ended up returning this case and went with another MUSETEX case (specifically, 903-D6). It is almost the same case, except there are dust filters on the side and theres no remote for the 903-D6 (which I was fine with because that wasnt a big deal to me).

Overall the case works. Has good room and wasnt a hassle to connect all 6 fans (since theyre connect to a main controller). Came with a RGB controller, easy to use. I purchased it mainly because of its many pre-installed fans which there are many of. The only bad thing I could nitpick would be the glass panel at the front potentially restricts airflow. Taking off the panel would increase airflow but it doesnt look as good and more importantly leaves the fans vulnerable to foreign objects. Front introduces dust and unlike the top and bottom dust filters, the front of the tower (the one that sucks in air and dust) has no filter or mesh of any kind. Even with two dust filters at the top and bottom, the inside will accumulate dust very quickly. The best resort would be to create or purchase a dust filter that can filter the air from the dust at the front. Taking off the front glass panel if you choose to game with it. RGB works. All USB ports work. There are a few scratches on the case upon arrival but as long as all the fans are working Im fine. Ill update the review in the coming months to see if one of them stops spinning or the moment the fans begin dying out. I feel the amount of pre-installed fans is what made me choose this case over others whos tower may have had a front mesh to prevent dust. If this had a front mesh itd be a five star product.

First off let me say I like the tower now that it is complete. The glass looks great and everything works like it should. However the build process is horrible. It does have pretty decent access to run cables cleanly but when you get to the hdd install it is a pain in the ass. You have to reach way into the bottom to access one side and you have to disassemble the front glass panel and lower fan to access the other side. This all could have been avoided by simply mounting them in another direction where the mounting can be done from the side panel access. That being said it runs pretty quiet and the lighting is pretty cool when coupled with an rgb keyboard and mouse.

When I first ordered this case it was fairly new and there were not a lot of reviews so I was unsure of what I was gonna get. I am not sorry that I bought this case whatsoever. Pros: Very easy to build in Lots of features Good amount of cable management space Tempered glass panels Good airflow Cons: The sticker that came on the glass side panel was almost impossible to get off and left all sorts of glue residue. I had to use a scraper and rubbing alcohol to get it off but if that is all I have to deal with that is fine. I wish they included those rubber inserts where the cables feed through to the motherboard so it would hid your cables a little more. Those are my only two complaints and they are small. I see a lot of people are trying to control their RGB fans with their motherboard instead of the remote and button and it is possible. The case includes an RGB cable attached to the RGB controller that plugs into your motherboard. If your motherboard has this connection you can control the RGB with your motherboard. To activate it you have to hold down the RGB button on top of the case until the RGB blinks. After that you can control your RGB with the motherboards RGB software. I have ROG STRIX motherboard so I have to use Aura Sync to control it. Definitely recommend this case!

Although this case is cool with all its lights and colorful fans it is not friendly for beginners. This is just my opinion of course. I can tell you there is no reset switch in the front control panel wiring. If you have built enough pcs to be able to navigate all the extra wiring that comes with powering 6 fans then it might be a piece of cake. The standoffs were a pain to work with when needing to reposition. Them in a different spot. Wasted money on this.

This Mustek tower was perfect for my pc build. Plenty of roof for all my components and it just looks amazing. Extremely well ventilated with plenty of rgb fans. Greatly case .

Have everything, the only thing that the case don’t have is a put c

Muy contento con la Compra, todo funciona correctamente, los ventiladores son bastante silenciosos, hasta ahora disipan el calor correctamente, debido a su buen flujo de aire.

Note: I bought Cool ID Dual Fans and installed them at the bottom for maximum airflow. This case is fantastic. I was a bit skeptical because I had never heard of Musetex before. Reading some of the negative reviews confirmed that skepticism. I’m happy I gave them a chance because the quality of this case amazed me. From the included RGB controller switch (a remote too), sturdiness of the metal, cable management velcro, easy 2.5” SSD mounting, to the quality of the power and LED buttons. I am a satisfied customer. Furthermore, I reached out to their customer service for suggestions on custom panel designs. They were responsive and friendly. Great support was the cherry on top.