MUSETEX ATX PC Case Pre-Installed 6Pcs 120mm ARGB Fans, Mid-Tower Computer Gaming Case, USB 3.0 Tempered Glass Phantom Black Computer Case, MN6-B

The case was of decent quality. It was easy to reassemble it but the disassembling was the issue. Some of the screws were so impossibly tightened but eventually they came loose. The only issue I had/something that was dissatisfied with was the upper fan placements. I was working with a micro ATX so the top fans were blocking the CPU 8pin connector. I wasn’t entirely confident at first but I remove the dust trash at the top, unscrewed both fans and positioned them forward. It was a small hassle but I’m not sure if someone who wasn’t familiar with PCs would have an easy time figuring that out.

I like the look of it. Especially the tempered glass. The rgb fans are just ok. I thought it was poorly designed. They place the hard drive tray right next to the power supply. It was very difficult to connect all the cables to the power supply with the hard drive tray right next to it. The other thing I dislike about it is the rgb fan controller hub. First of all, the fans are 6 pin fans so you cant just directly connect it to your motherboard. You have to use the fan controller hub, which means you cant use software to change the color of the fans. You have to use the remote that they provide, or if you can somehow manage to connect the led swich cable from the front panel to the controller, you can use the led button on the case to change the color. Good luck trying to connect the led switch to the fan hub though (I couldnt). It was difficult to fit my motherboard in. I had to remove the top fans for it to fit. After putting the motherboard in, I put the top fans back in only to realize it was covering the motherboards power supply connector socket. So I ended up removing the top fans. Overall I think it looks nice, but has design flaws.

I received this case yesterday and in my opinion it looks very good for the price and the amount of stuff you get, 6rgb fans and an actual tempered glass side and front glass. Although my case exceeded my expectations, I cant seem to be bothered that one of the tempered glass screw was not there, and i can to find that the place holder was bent. Im not too nitpicky enough to send it back for a new one just because of 1 screw gone, too much hassle. But other than that it was satisfactory. Other than the missing side panel screw, the case was perfect in my opinion.

More internal space than I was expecting even though the case was smaller than I was expecting, which is great. I installed an ASUS x570, EVGA 3070ti, and h150i 360mm AIO on the front. Had enough room for everything! I was able to fit the cooler on the front, behind the Musetex fans, using push/pull fan setup. Had a couple inches of space left between that and the length of the graphics card. The fan lighting linked with my ASUS Aura mobo lights. Nice quality materials. The tempered glass looks great. Very happy.

I think the case is a great case for the price. The RGB is great the remote is nice to have. I wish it came with the adapter so I could of hooked it to my MSI Tomahawk mother board. That is just a little thing. I like the fact you are able to hide a lot of wiring from be seen. I love the design and the glass where you can see all of the inside. I will say it has good air flow through it. One complaint I have is the fans are super loud. When on high speed I can hear them over game play with headset on. In all though I will give this case 5 out of 5 stars. I would recommend this case to others. I seen other comments saying that there fans where only one speed. I have a remote that has speed controls on it. Look forward to buying another case for my next PC.

The case is smaller than others Ive used for custom builds. The nice part is everything fit and its a neat package. The 3070 graphics card fit with room to spare. The overall smaller size did present some challenges and caused me to think hard about the sequence of installing components and cables. Problematic was installing the liquid cooler radiator inside the top of the tower. I did not have room for both fans because one would have touched the RAM. The other problem I had was I had planned to install two 4TB 3.5 HDDs in a RAID for backup storage. There was not room for the hard drive tray in the bottom and the power supply. Of course, the power supply was essential so I went with one 2TB SSD instead. Not what I wanted but an acceptable compromise.

The case is cool looking but there are a few issues I have that caused me to return. The biggest is the RGB controller board defaults to factory every time the computer goes to sleep so you have to change it to match your other RGB devices every time. There are no clear instructions stating you have to hold in the RGB button on case to sync it with your rgb software (Armory crate for me). Imagine having to hold that every time you restart or let the computer go to sleep just to have them sync. I was able to cable manage ok but an 8th of an inch more in the back would have really helped. Lastly the fans are not as quiet as some say. Its not the worst but not silent either.

THE GOOD: Its a very nice case for the money no chips or gouges it looks amazing and had plenty of room in the back for all of the wiring. It had every screw and stand off I ended up needing and a few extras THE BAD.... it says its a full ATX case but I had to take off the top fans in order to fit the motherboard in. I was able to put them back in after install but they dont leave you one square mm of extra space as far as height is concerned. The remote gives you plenty of color options but I would have liked to have dual options like white and blue or green and yellow... but thats just me getting picky. Also each fan has a sticker on it and whoever puts them on doesnt put them on perfectly centered so it makes the fans look like they are wobbling when in fact its just the sticker thats not centered giving it that look. OVERALL: Great case with the room I needed. looks nice seems to breath fine and I have no real complaints about the functions.

When I first ordered this case it was fairly new and there were not a lot of reviews so I was unsure of what I was gonna get. I am not sorry that I bought this case whatsoever. Pros: Very easy to build in Lots of features Good amount of cable management space Tempered glass panels Good airflow Cons: The sticker that came on the glass side panel was almost impossible to get off and left all sorts of glue residue. I had to use a scraper and rubbing alcohol to get it off but if that is all I have to deal with that is fine. I wish they included those rubber inserts where the cables feed through to the motherboard so it would hid your cables a little more. Those are my only two complaints and they are small. I see a lot of people are trying to control their RGB fans with their motherboard instead of the remote and button and it is possible. The case includes an RGB cable attached to the RGB controller that plugs into your motherboard. If your motherboard has this connection you can control the RGB with your motherboard. To activate it you have to hold down the RGB button on top of the case until the RGB blinks. After that you can control your RGB with the motherboards RGB software. I have ROG STRIX motherboard so I have to use Aura Sync to control it. Definitely recommend this case!

This Mustek tower was perfect for my pc build. Plenty of roof for all my components and it just looks amazing. Extremely well ventilated with plenty of rgb fans. Greatly case .