MUSETEX ATX PC Case Pre-Installed 6Pcs 120mm ARGB Fans, Mid-Tower Computer Gaming Case, USB 3.0 Tempered Glass Phantom Black Computer Case, MN6-B

This (907 Phantom black) is an excellent case for the price. It’s hard to find much info about this case online so I decided to do a basic review here. Materials are all high quality, the tempered glass panels in particular are very impressive. The glass panels are secured with stealthy black thumbscrews that are easy to remove when cleaning the case and doing the install. The glass side panel has black corner protectors that can be removed or left in place for aesthetics. There is plenty of room and options for cable management here. I was even able to fit a non modular Corsair power supply with a massive nest of cables quite easily in the case. The six included fans are shockingly quiet and provide a nice level of cooling. If you need extreme cooling and don’t want to go with AIO’s you may want to upgrade the fans, but the cooling provided by the stock fans is excellent for my setup. If you dont want to upgrade the fans and find that you need a bit more cooling when gaming you can also remove the front glass panel to get a nice overall temp reduction. Removing the front glass panel reduces temps significantly, in my testing the overall temp of my overclocked RTX 2060 Super was reduced by 9°C under max load to 56°C! The included fan controller I received was setup for 5v 3-pin ARGB and not 4-pin RGB so I could not connect it to my motherboard to attempt control through software (no 5v ARGB header). I had already planned on using the included remote so this was not a huge problem for me, just be prepared if you are buying a new mobo for the case or if your existing board does not have ARGB headers. The fan controller works well with the included remote and controls brightness, mode, and speed of the fans when simply connected to an available SATA power connector from your PSU. Plenty of options there for me and the rgb lighting provided by the fans is killer. Another apparent change in the model I received was plastic PCI slot covers that are secured with a bracket plate and thumbscrew. No bending and snapping off metal PCI slot covers required and I definitely prefer the plastic covers (no sharp edges). The feet on the bottom of the case have a soft rubber material on them so the case stays in place and won’t scratch your desk surface. The only reason I gave 4 stars for material quality is several of the already installed mobo risers were tapped poorly and screws were stopping early or going crooked when screwed in. I had spares to replace the wonky risers so this wasn’t a big deal, but it is worth mentioning and I advise testing your screws in the risers before you seat your mobo. They also included spare wires for the power switch, reset switch, and HDD/Power light LEDs. If this is your first build note that you can ignore these and set them aside as backups if something were to go wrong with the ones that are already installed. NOTE: If your front panel connector cables for HDD LED, power etc. do not have + or - paint to indicate positive or negative wire there will be a triangle on the back side of the connectors. The triangle indicates which wire is the positive wire. TLDR: Fantastic case at this price point and one I recommend if your budget doesn’t allow for a more expensive case. If you are considering this case go ahead and pull the trigger!

One of the things the case needs to install the motherboard into it are missing. I had to buy them somewhere else due to it, its like selling someone a Lego set without the few Legos it needs to be build lol but other than that everything else seems fine 3 out of 5 stars for me

THE GOOD: Its a very nice case for the money no chips or gouges it looks amazing and had plenty of room in the back for all of the wiring. It had every screw and stand off I ended up needing and a few extras THE BAD.... it says its a full ATX case but I had to take off the top fans in order to fit the motherboard in. I was able to put them back in after install but they dont leave you one square mm of extra space as far as height is concerned. The remote gives you plenty of color options but I would have liked to have dual options like white and blue or green and yellow... but thats just me getting picky. Also each fan has a sticker on it and whoever puts them on doesnt put them on perfectly centered so it makes the fans look like they are wobbling when in fact its just the sticker thats not centered giving it that look. OVERALL: Great case with the room I needed. looks nice seems to breath fine and I have no real complaints about the functions.

So the case is made with fairly good materials, looks cool and, the size is perfect for my room. When I bought this case I stupidly thought the pre installed fans had a 4 pin 12volt connector sadly it’s a 3pin 5volt connected that’s my fault. So before buying this case make sure your motherboard supports three pin five volt fan connectors otherwise great case for its price

This Mustek tower was perfect for my pc build. Plenty of roof for all my components and it just looks amazing. Extremely well ventilated with plenty of rgb fans. Greatly case .

My 16yr. old son only requested two things for Christmas; cash and a gaming PC. I told him cash was something that was earned. I did, however, purchase this case for him. Theres no question, this is an awesome case and at the right price point. The lights on the fans work great, the remote allows for multiple selections and the sound detection is better than we expected. After we got everything put together, the front middle fan stopped spinning - it would start for half a second and then stop. I contacted Amazon though the Product Support button on the order summary screen and explained the situation. Amazon immediately got me connected to Musetex and they were FANTASTIC! Their support was extremely responsive, they did not hesitate to send me a replacement fan, and they set proper expectations about how long it would take for the replacement fan to arrive. They kept me up to date and provided me with an international tracking number. The replacement fan arrived today. In fact, they sent me a box of six (6) replacement fans. And they also sent me a new fan control board too. Who does that? Remarkable. Ive dealt with a lot of product vendors over the past 40 years and this by far exceeds my expectations. Its comforting to know there are still really good, honorable vendors out there... Thank you Musetex for all your help and support, you have won my business for life. Keynotes about the case: - the motherboard mounting stand-offs are pre-installed, extras are provided - more than sufficient mounting hardware is provided - wires are well labeled and the right length - internal drive mounting is marginally tight, but not that big a deal - several PCI slot options on the back panel to accommodate video, WiFi, etc. - all the buttons and ports (On/Off, Reset, USB, headpone, microphone, etc.) work as expected There are only two things to be aware of: 1. This case is not designed to mount an internal DVD/CD drive - not an issue, externals are ~$20 2. It is unclear which are the + / - terminals on the harness plug for HDD LED, Reset Switch, and Power Switch - the wires are not striped however the plugs are labeled with their names. For our motherboard (MSI B450 Gaming Plus MAX ATX AMD) the proper orientation was labeled side of these plugs faced to the outside edge of the MB.

Got this case recently! Absolutely loved it was easy to install everything and was so excited as this is the first one Ive build from scratch. I turned everything on to make sure everything worked properly before putting the glass side panel on. Once i verified everything was working and good to go i powered everything down so I could put the side panel back on was working on lining up to holes for the screw and suddenly the glass completely exploded everywhere! I never bummed hit or pushed on it. It just completely shattered. Im really bummed out. Update: contacted the seller and they have been really helpful! They are sending me a new side panel and have taken every step possible to make sure they sent me right panel. I havent received it yet but will update once I do. Update: wow guess I forgot to update again. I received the side panel and it was wrapped great! Was able to get it unwrapped and installed with no problems at all! Great customer service!

So to all the people saying this case doesnt ha e room for water cooling... see images of mine with water cooling. This is a good case for 90.00. Comes with 6 fans and an rgb controller that you can change with the included remote or with the switch on the top of the case. The 6 fans and controller are worth 50.00 by themselves. They are quiet and push a fair amount of air. I have a Gigabyte z590 elite ax board which has a larger than normal header on it and I was able to fit a cooler master ml120l cooler with zero issues. It can fit a 250 cooler up top but it will cut off your accessibility to some of the plugs on your mobo so it would definitely need to be installed last. There is ample room for wires and enough ports to get the wiring clean so it doesnt look like my first PC with wires everywhere. It has enough room to add up to 3 ssds and a couple hdds. Granted it is tight under the cover and around the power supply but you can definitely get all of it in there. I am currently running an nvme, a sata ssd and a Sata hdd. I will be adding another Santa ssd and 2 more nvmes and I have no concerns for space. The thumb screws holding the glass panel on mine needed a little tweaking I am not sure why they werent okay, but it was a simple fix that literally took about 10 seconds. I would recommend this case for sure, imo it is good enough quality to last several years and isnt a million dollars either.

The Top fans get in the way and must be removed prior to fixing a ATX board to the case. The top fans can still be used, but must be moved more to the side since itll get in the way of other parts such as the CPU fan. Needless to say, Reinstall the fans last. ATX boards have a very snug fit, nearly scrapping the top and bottom of the case. For the MOBO area, theres only 6 screw holes so expect ATX boards to hang off a bit. As with most mid-size cases, its a pain in the ass to work with, but for some reason, this one gave me the hardest time of all the mid towers Ive worked with. Also note the power switch cables have no +/- labeling on them and just assumes you know which direction these cables should be installed. If youre not that experienced with these cables then have fun googling it. The most baffling part of this case is the glass panel blocking the front fans. Its not like some cases where the front panel juts out leaving a gap for air to come in, no. Its sealed tight so it makes the front fans absolutely useless. It doesnt make any sense why this even thing, anyone with even a ounce of PC knowledge would look at that and automatically think thats a bad idea. Thankfully, you can remove it, though it seems like this case was designed (aesthetically) to have the glass panel on the front as itll just be a gaping hole with the only things blocking the front part being the fans themselves. You can literally throw small objects through the front if you felt like it. Why the front part doesnt have meshing meanwhile the top fans do boggles my mind. Either way, my friend seems to be happy with the lights. If one of my other friends tries to get me to build a PC using this case, Im going to tell them to choose another or find someone else to build it. Dont want to deal with this again.

I was looking to give my teenage daughter an RGB case that offered her a view inside the pc as well. I wasnt looking to spend a ton on a case and found this. I needed it quickly and it was shipped fast. The case is nice and laid out decently. The wiring could be sorted better pre-shipment but no big deal. The trays underneath are a pain and the power supply compartment is a very tight fit for any real power supply. I had to remove some stuff to get an 850 watt EVGA power supply in there, but it fit. My biggest disappointment is the ARGB connections. Most motherboards do not have that proper sockets to use the built-in wiring to use software based ARGB controls, thus you resort to needing to use the remote only. I would buy the case again knowing what Ive discovered as I feel for the price it is a great case.