Wishlist(0)
520shoppy.com
Categories See All >

Plastics 2000 - KYDEX Sheet - 0.080 Thick, Black, 8 x 12, 2 Pack

(0 Reviews)
Price
$11.58
Quantity
(10000 available )
Total Price
Share
81 Ratings
70
7
0
0
4
Reviews

  • Mike K.

    > 3 day

    Don’t have it yet but I LOVE your thickness picture using pennies. VERY VERY Smart!!!!

  • edward Kerns

    > 3 day

    I have an acoustic guitar, bought used, that had a small hole cut in the side to install a pickup. I needed to patch the hole in an area with a compound curve. Without a lot of expense a proper repair just wasnt practical, so I molded a piece of Kydex to the right shape, and used double faced tape to cover the hole. Not perfection, but not bad!

  • Frank J. Rodriguez

    > 3 day

    Can’t tell u how I liked the product cuz I can’t use it, cuz it did not come with instructions!!

  • Brian E.

    Greater than one week

    Made rc car diffusers, splitters, brackets. Very durable and strong.

  • Matther Talor

    > 3 day

    As advertised, no complaints at all.

  • Fishook

    > 3 day

    Great for models

  • Ramano sabastian

    > 3 day

    Quality material

  • Dennis A.

    > 3 day

    My previous review was a for a different product and vendor, These were AWESOME!

  • Teagan

    > 3 day

    It was thick enough to be sturdy and strong but still very easy to cut. Perfect for DIY and cosplay projects

  • Len Hill

    > 3 day

    Good stuff

KYDEX
KYDEX sheet has excellent forming properties, which results in uniform wall thicknesses and crisp detail. KYDEX sheet forms to deep draws with low forces when heated to the upper end of the forming temperature range. Unlike many other thermoforming sheets, KYDEX sheet has unusually high resistance to hot tearing.

Forming Guidelines
- Oven temperatures should be set differently than the settings used for ABS or FR-ABS.

- Typical heater settings (percentage timers) are 30% – 50% top heaters and 50% - 70% bottom heaters.
- The most frequent problem is trying to heat the sheet too quickly, particularly on the primary surface.
- Cycle times will vary depending on the oven conditions and grade of KYDEX sheet being formed.
- When forming KYDEX sheet, it is better to rely on the sheet appearance during heating than on fixed cycle times.
- Forming temperatures – Guidelines: (Sheet should not exceed 204°C (400°F).

165 - 177°C (330 - 350°F) for < 1.50mm (0.060").
182 - 196°C (360 - 385°F) for 1.50mm to 3.20mm (0.060" to 0.125").
196 - 204°C (385 - 400°F) for > 3.20mm (0.125")

- Ideally the core sheet temperature should be within 10°F of the surface temperature.

Sheet Appearance During Heating
As KYDEX sheet is heated, the inherent stresses in the sheet will relax.

Stage I: The heating is marked by wide undulations and softening.

Stage II: The material will start to form small ripples (known as oil canning). .

Stage III: The material will start to smooth out and sag (KYDEX sheet will generally sag less than other thermoplastics due to its high melt strength. .

Stage IV: The ripples will have smoothed out indicating that most stresses have been removed. 10 to 30 seconds afterwards the sheet is ready to form.

Related products

Shop
( 511 Reviews )
Top Selling Products
Home
Categories
Cart (0)
Messages
Account
0 Cart Item (s)

Your Cart is empty